2. speakers
  3. 1403935250

REL Magic

I have to report this finding as a breakthrough to a new plateau. For the past four years, I have been running two REL Strata III's, one behind each Maggie 3.6R. RELs have always been known for their hook up at the speaker outputs. By this method of integration, REL boasts that their subs somehow lift the entire system. I have always felt this to be true, especially with one for each amp.
But now, I have just completed DIY signal cables for each sub using the same Neutrik connectors into the subs. I used some 16-gauge OCC copper wire by Furutech in the same terminal scheme as the stock cords. As expected, the bass notes are more extended and better defined, but this phenomenon of improving the whole presentation has also appeared again as even more impressive. Everything across the soundscape is just a bit more sweet and clear. If you have not upgraded your REL signal cables, please do.
128x128jafreeman
pakito
3 posts
 
Hello Nmmusicman ,

Thank you very much for your help!

Personally, I opted for the fuse Quamtum RED instead of SR20! I noticed that by reversing the direction of the fuse holder, it has an impact on the final result, I tested the fuse dands 2 directions and chose the direction that offers a quality of the bass faster and defined! there is a meaning to install the fuse! then I suggest you try this if you have done it again!

Next step will be the cable REL BASSLINE BLUE and better cable Power Supplies!

Please tell me, what interest to replace the main fuse 5 Amps by one of those 7 and 6.3A on the main board replaced with 6 Amp?

Thanks again for your help!
nmmusicman
276 posts
 
Hi Pakito,

Yes fuse directionality should be explored by everyone who has taken the time to upgrade their fuses and with high resolution fuses even more so.

The reason I bump my fuse ratings up slightly is that since most high end fuses are on the costly side, as compared to generic hardware store glass fuses, I want to increase the headroom margin so as not to risk blowing a fuse in the event that the circuit designer chose to be on the conservative side of current protection and to also provide circuit protection in the event that a circuit malfunction does occur.

Hope this helps.
geoffkait's avatar
geoffkait
23,365 posts
 
Taking the whole fuse directionality thing a little farther, wouldn't it make a great deal of sense to ensure that all wire everywhere is in the correction direction. You know, things like internal wiring of electronics, internal speaker wiring, cartridge wiring, tonearm wiring, power cords, interconnects and speaker cables, of course, romex, wire in transformers, all those tiny little wires in flat cables, jumper cables, capacitors, things of that nature.
vladimir
346 posts
 
Signal Cable has been offering improved speaker-level cables for REL subwoofers at a great price for many years.
mattmiller's avatar
mattmiller
1,504 posts
 
I 2nd the Signal Cable SPKON connction. Signal Cable makes an awesome upgrade for the REL. I own a B2 and I love this cable it has the SPKON connection on 1 end and the amp side has bananas for super easy hook up, the cable is stiff and about an inch or so in diameter. It really improves quickness, tightness and solidity plus weight. Signalcable.com
More to discover