Irvrobinson:
Fair enough - I respect reluctance to drink the koolade, so to speak. There's so much of it in high-end audio and it's lamentable.
One doesn't need gobs of money to obtain a no-feedback amp. The VAC Renaissance 140/140 Mk. III monoblocks cost $28k at retail (the Signatures were $36k), but can now be had for $7.5k on the used market. The 65 watt 70/70 Mk. III retailed for $14k (Signature was $18k), but can now be had for less than $4k used. As for reasonably priced solid-state alternatives, some of the Sim amps don't use feedback.
Let me be clear - I'm not saying that all amps that use feedback are crap. I mentioned my old Bryston 4B ST - it's a lot of amp for the money and can bring a lot of enjoyment if used properly, but it sounds two-dimensional and moribund compared to a good amp that does not use feedback. If I was putting together a second system and was confident that I was getting an amp that was well taken care of, I might consider a ML 334, irrespective of Harmon's problems (I have a friend who can pretty much fix anything if he can get a schematic), as it is again a lot of amp for the money. But does this amp, or for the sake of argument, the 33H that regenerates power and costs a lot more money, compare to my no-feedback darTZeel (solid-state) or VAC (tube)? If a more realistic protrayal of unamplified acoustic instruments (i.e., classical, much jazz) is the goal, no, I don't believe so.
I'm not as doctrinaire as you may think (I'm not running a 2A3 amp on a single-driver speaker fed by an Edison cylinder). Simply put, assuming a good room, decent A/C supply, knowledgeable set-up, and equipment of equal parts quality and construction, I believe that a no-global-feedback amp, tube or solid-state, of roughly 100-150 watts/channel on a 92+ db. efficient speaker featuring a simple 1st order crossover and fed by a quality analog source or full DSD recording is going to reproduce unamplified acoustic instruments in a more realistic fashion than an amp with a ton of output devices, tube or solid-state, using global feedback driving an 86 db. efficient speaker with a 4th order crossover that's fed by a typical PCM source - not to be obnoxious, but that's experience, not extremism.
All the best.