Rogue Audio. Reliability issues? Anyone?

@wolf_garcia  I've had the same experience as you, the tube equipment is more reliable than the solid state equipment I've owned.

I stuck a set of 4 NOS matched GE 6SN7GTB tubes in my original version Schiit Freya preamp (note that it’s the model that keeps the tubes on when you switch to one of the two "passive modes" which I only do to hear if the tubes are working properly, a handy feature) and they’ve worked perfectly and haven’t required replacement for maybe 4 years or more. I have unused original box GE replacements for them that sound exactly the same that are waiting in the wings for their big moment, along with Sylvania "chrome domes," new Tung Sols, whatever the original Russian tubes are that the thing shipped with, a few Amperex, etc. Part of the reason is my Dennis Had Firebottle SEP power amp also uses a single 6SN7GTB so I’ve collected a pile of ’em, even though I now mostly use the brilliant Pass XA-25 amp (I do swap in the Had amp from time to time when I feel it needs to get off the shelf, and it always sounds fabulous). Also I have a couple of cool all tube guitar amps (one is tube rectified and single ended) and I pretty much don't even think about their tubes...they simply work.

I’ve had an Atlas for years- never a problem. A bad output tube can cause a resistor to blow in any tube amp. Ive had problems with Sovtek EL84’s in other amps.

Thanks everybody! This has been a good read.

To the point of affordability of tubes; It’s not about money exclusively. It’s the time they take. I mean, when I get this amp back and throw some tubes in it, is it just going to fail again and blow something else in the amp? And then it’s gone for another two weeks and $475 out on the shipping and repair bill, plus a tube.

If it’s a blind gamble (on a not so cheap part) whether or not it won’t screw something up in your amp, that’s getting into “stupid” territory. Am I misunderstanding the situation? A perfectly functioning amp can be damaged by tube failure? And tube failure is random and not so uncommon?

I’m new to this and I haven’t built a level of trust with tubes so far, but I absolutely love the sound. I guess if I get burned again, I’ll go back to Solid State and donate $500 to starving children every sixth months. That’s better than having holographic sound on and off throughout the year.

As I mentioned in an earlier post I had a Rogue Cronus Magnum a number of years back, never had an issue with it. Sold it only because I wasn’t a fan of the sound of KT 90 tubes , solid state sounding to my ears. I presently have 3 integrated tube amps: an Ayon Audio Spirit 2 originally in my main system now in my 2nd system, zero issues with that for more than 12 years or so; a Line Magnetic 518IA in my main system , zero issues for 7 years; a Finale Audio 7189 MK2 also in my main system, zero issues for 5 1/2 years. Aside from those I have a Modwright Audio Elysee tube DAC in my 2nd system (previously in my main system) , as well as, a Modwright Audio LS100 tube preamp in my main system (hooked to the Modwright SS power amp in my main system). Both of the Modwrights have been trouble free for going on 9 years. Point of all of this is tube equipment isn’t necessarily any more prone to problems than solid state gear. Knowing that the power tubes have less expected life than the preamp tubes or rectifier tubes I change them out when they are nearing that point. The 2 integrated amps that are manual bias I check the bias once a month, and if I find a tube or tubes falling out of bias repeatedly on the high side beyond an acceptable level I replace them. You didn’t note anywhere in your posts the age of the tubes, nor your bias routine and how that measures up to Rogue’s instructions so hard to know if you possibly contributed to your problem or not. That said, given your angst about tubes maybe take some time researching solid state amps that meets your SQ goals coupled with a good reputation of reliability and sit back and enjoy the music instead of fretting over whether or not a tube is going to send your amp repeatedly back to the manufacturer.