2. digital
  3. 1388880204

SACD Player Won't Play Hybrid SACDs

A few years ago I purchased a used Sony SCD-C555ES SACD changer. I bought it to use essentially as a CD player run through an external DAC. I have about 500 redbook CDs. A couple of days ago I bought my first SACDs and began playing them. Everything worked fine until tonight. For some reason, the same SACD hybrids that played fine several times will not now play in SACD mode. I get the message "Not Hybrid" and the player defaults to CD mode. I toggle between "Multi and 2 channel" and I get the message "Not SACD." Any ideas?
jjpeepers
bvdiman
491 posts
 
Jjpeepers, good to know.. However if you plan on keeping the player for long, it is advisable to keep another sealed optic assy. as spare - it is getting scarcer by day. Depending on humidity, the problem could be an unpredictably recurring one. With Part at hand, should take no more than one hour to have it professionally replaced.

*For your easy referral, Part is : Sony, Device Optical, KHM-230AAA
jjpeepers OP
5 posts
 
Thanks for the info. Some problems have developed in attempting to get my unit repaired. There are now apparently 3 part numbers associated with KHM-230AAA. The original part # was 8-820-132-02. That was replaced by 8-820-132-03. The repair place ordered this part. It arrived, but was defective and was returned and another one ordered. Three weeks have passed and the part has not come in. Apparently, this part has been replaced by 8-820-132-09 and even this may no longer be available.
Is anyone familiar with 8-820-132-09 and is it now the "new" part for the SCD-C555es?
jjpeepers OP
5 posts
 
One last try. The first replacement part (from Sony) did not work. I purchased 2 replacements from someone in Taiwan that, based on various sites and blogs, is the go-to guy for laser assembly pickup replacements. He gets very favorable ratings and was certain the laser would work for my SACD player and all the ones that used that particular laser. The first one did not work. I'm getting ready to drop off the remaining laser to the repair shop.

There is a "solder blob" that needs to be removed from the assembly for installation. The repair person was well aware of this and properly removed it on each laser. Is there something we are not doing? It seems a bit crazy that none of the replacement lasers work.
bvdiman
491 posts
 
Try checking the flexy-ribbon cable running from main to optic assembly board.
Occurred to me once where new optic wouldn't operate, and it turned out (after thorough
testing) one channel amongst six of what appeared to be still perfectly fine cable was bad.
After flexy-cable replaced, everything was good.

*Suspect also other connections that are possibly susceptible/get in the way/affected over
long haul when tray of disc travels in-out, or one that needed plug/unplugging when
technician is replacing the assy.
mr_m
1,900 posts
 
Just a thought. Wouldn't it be easier to purchase a different player?
More to discover