Seperating 2 channel and HT in the same system.

If you use pre-amp without pass through input you could do that. In my setup I use a Bent audio passive unit for two channel and sunfire theatergrand pre/pro, unity gain with the Bent passive is: volume all the way up, I have to remember to turn it down before I switch inputs for sacd. If you get a pre with theater pass through you won't have to do this. I wanted the pre that I wanted so I chose to put up with this little pain in my system. Lots of good pre's have the theater pass through now a days (tube and SS) so that is the easy way to go.

Sogood51
I am using an FT Audio which I guess will need to be done the way you and the others have described.The SS Proc. I have is a Lexicon CP-3Pro. Have not ever had it online and I really do not know what to expect .

I just got my dream speakers finished and they are more than I ever hoped they would be.I have a few XO Cap upgrades to do and to get a pair of Modifed NEAR M10's to use as my CC speakers and I will have completed my finishing touches.In the future I hope to beable to get a SS processor that has AC-3,but I am mainly in it for Stereo so I will be happy with what I have.

Abex, F.T.audio is a great passive, I may pick up a used one for my second system. Congrat's on the speakers, if your going to use the F.T. audio with pre/pro then I would just get a bang for buck model (outlaw, rotel, ect.) the top of the line pre/pro's cost so much more because they are also high quality two channel pre's. You won't need the extra cost as you'll have your passive for that.

Sogood151
The Lexicon CP-3Pro is really alot of processor if you had ever read the reviews on it. I would be willing to try another SS Pro. in my system to see what it could do ,but the cost is rather substantial after all the upgrading I have done in the last year. I shall be making a few finishing touches before considering the AC-3.

Still need to get the CC Speakers which will be a pair of NEAR M10's with Modified Drivers to match the Modified NEARs I have at present and upgrade the Crossovers by changing all Cap\Resistors for all speakers (Mains\CC\Rears)make DIY Sub and DIY Rack after getting everything else in order.

I still have a set of LeAmpII's on the way also.So this has been an extensive and long overhaul.So it will be awhile before getting another SS Processor,but you never know I might run into some extra cash down the line.

Later!

I have an integrated system using the Anthem AVM20 v2 as my HT pre/pro running into the Cary SLP2002 2 channel preamp. The Cary has a HT bypass input. The Cary can be found for under $2000 used and when paired with the right tubes it is to die for at this price. It also has a tubed headphone output which may or may not be of interest. It has both balanced and single ended inputs and outputs. I too was heavy into HT but once the HT started sounding better as a 2 channel system, things went the other way quickly. I will say that the 2 channel preamp is probably the key component next to good clean power to make the 2 channel really start to shine. Of course a good cd player, proper amplification and the right mix of cabling plays a part as wel, but a good tubed 2 channel preamp gives the system dynamics, depth and a huge presentation.