Mastersound. King of the road.
SET amplifier recommendation
I have been listening push-pull tube amp for a long time. Finally I'd like to try SET. Seems a lot of people moving from push-pull to SET. My budget is <$3000. Looking at Coincident Dynamo MK III 300B. As there is no dealer for Coincident, i can not try it/hear it. Anyone has this? I'd like to hear your comments. i also looked at Decware, Bottlehead, etc. It seems Dynamo is better. Line Magnetic has some interesting ones. But i am not sure the quality can match Canadian made one.
My main speaker is B&W 805. Listening space is less than 400 sq ft. My current push-pull setup is CJ premier 15+CJ premier 17ls2+ Audio Research VT100 MKI. Thank you.
My main speaker is B&W 805. Listening space is less than 400 sq ft. My current push-pull setup is CJ premier 15+CJ premier 17ls2+ Audio Research VT100 MKI. Thank you.
- ...
- 59 posts total
Get a Golden Sound SE-40 PSE amp.roberjerman2, do you mean the ubiquitous Golden Tube Audio SE-40? If so, my guess is two of these bridged might work with the OP's B&W 805s but that's a hard row to hoe. These amps need to be rebuilt and matched in order to extract the best sound and run reliably (ask me how I know this). The B&W speakers are voiced for SS amplification and are never going to sound their best with tube amplification; possibly with the exception of a pair of Atma-Sphere OTL monoblocks. My recommendation is to stay with SS or, if the OP really wants to do SET, change the speakers to something more appropriate. |
The B&W speakers are voiced for SS amplification and are never going to sound their best with tube amplification; possibly with the exception of a pair of Atma-Sphere OTL monoblocks. My recommendation is to stay with SS or, if the OP really wants to do SET, change the speakers to something more appropriate. +1. (Although Ralph/Atmasphere is of course much better positioned than I am to comment on the suitability of his amps for this particular speaker). And it’s not just a matter of having enough power. Given that the speaker is presumably voiced with solid state amplifiers in mind, which almost always have a near zero output impedance, the interaction of the very wide impedance variations of this particular speaker (see Figure 1 of JA’s measurements) with the relatively high output impedance of nearly all tube amps will result in a tonal balance that was not intended by the speaker’s designers. Regards, -- Al |
The B&W speakers are voiced for SS amplification and are never going to sound their best with tube amplification; possibly with the exception of a pair of Atma-Sphere OTL monoblocks.We’ve got several customers that are very happy with this combination. Our amps have a lot in common with SETs- quite literally, they are two SETs wired together differentially, with the output bridged. Triode, class A, with a character like SETs of distortion falling to unmeasurable as power is decreased. Unlike SETs they have about 1/10th the distortion, much higher power and wider bandwidth. The cost of replacement for a full set of power tubes for a pair of M-60s is similar to one good 300b. |
- 59 posts total