2. tech-talk
  3. 1182646644

Soldering 101 for Audiophiles

I am replacing the tweeters in my Tympanis with new ribbons which I have just received from Magnepan.

Unscrewing all of the screws, it seems they are connected at the top and the bottom with a soldered connection?

I have a cheapo pencil shaped soldering iron from Radio Shack around the garage but otherwise havent soldered anything since I tried to put together a Hafler amplifier in 1979 and ended up paying someone else to do it.

Can anyone please explain:

* basic soldering technique
* what materials do I need for the best audiophile connnecton? Silver?

Thank you,
cwlondon
davehrab's avatar
davehrab
380 posts
 
Here's a link with video tutorials to get you started

http://www.tangentsoft.net/elec/movies/
shadorne's avatar
Ag insider logo xs@2x
shadorne
7,477 posts
 
As per Drjoe....I usually "tin" the iron a bit and then touch the connection to be soldered....once the solder begins to bleed into the connection I apply more solder to the wires....the process is best done quickly as too much heat can damage stuff and tons of solder has no advantage.

Use of the solder sucker device is also the key to cleaning things up on an old connection. I like to start with everything clean. A connection will be much stronger if you remove all previous solder from the terminal.
unclejeff
1,313 posts
 
I had fellow who installs landscaping (plastic pipes) tell me that he "is real good at sweating pipes" so I let him into my basement to replace a small area of galvanized.

As soon as I saw him torching the solder---not the pipe---I smiled and called a real plumber.
riffer
362 posts
 
06-24-07: Davehrab
Here's a link with video tutorials to get you started

http://www.tangentsoft.net/elec/movies/

I agree.

He uses a pencil iron and a few extra tools; so realistic for the occassional DIY'er.

I just played the desoldering tutorial and there where plenty of good techniques there.
joeylawn36111
574 posts
 
Make sure you use solder made for electronics, namely rosin-core solder. Don't use acid core solder - that's for plumbing.
More to discover