SP10mk2: OMA Graphite plinth vs.Dobbins plinth

Chakster,

My Acoustand SP10 MK2 plinth should be finished this week. My SP-10 is out to Bill Thalmann for routine tuneup, so I'll likely not hear it in the new plinth until November. I'll try to remember to post my impressions .

Perfect, really looking forward for your feedback about this plinth. Did you get the obsidian style or different design?

"09-20-15: Chakster
Steve, what about version for "12 inch tonearms? "

For 11" and 12" tonearms, I would need to draw new plans to incorporate longer tonearms into this plan. As it is, I drew my plan specifically for the tonearm I had planned to use in my instance, a Graham 2.2. And with no thought to producing any more.

I can say, after using this plinth for more than a year, I am happy with the end result. compared to a massive Baltic Birch constrained layer plinth, this 'light-rigid' plinth does indeed have a quicker sense of pace about it. Transients happen with a quickness not heard from the more massive base I had tried just previous. Plus, I have excellent bass performance in this setup that I would not have thought previously possible out of that tonearm and the two cartridges I've used on it. Very articulate and detailed...with great pace and slamminess. Better than I thought it would be.

The Mule Plinth

Yes, Chakster, I'm getting the "Obsidian Inspired" plinth in satin black/medium oak veneer. I customized with adjustable black Delrin feet (from a UK mfr near Acoustand) that raise the plinth about 2cm higher than the sorbothane feet pictured on the Acoustand website. I'm trading off a bit of the sleek, "low rider" look with the stock feet for ease of leveling. Just had the SP10 painted in black automotive paint. We'll see if it all comes together well! Bill Thalmann is also adding the Krebs Upgrade and installing a new bearing thrust pad. Experts like Bill may not be doing comprehensive SP10 work in the coming years, so I opted to address electronics and motor/bearing in a single shop visit. My PSU is a Dave Cawley "Timestep", so I'm set there.

I've received my "Obsidian Inspired" plinth. I had Acoustand install "type 1 black delrin height adjustable feet" from Ebay UK seller "kridon-image". The plinth has the simple look I was after. The black delrin feet blend nicely. Both plinth and feet are very well-crafted. The black painted wood requires care to prevent scratches. The plinth is lighter than I expected, but will sit on a very heavy Myrtlewood platform. My SP10 is on its way to Applied Fidelity for updraded sapphire bearing installation, with servicing and Krebs upgrade just added by Bill Thallman.I may have the table back for Christmas and will report on how it sounds once it is put back together.