Speaker distance and tow in?????/


My room is big / 18x30. But due to arrangement I can only bring out my speakers 2 ft from back wall..... side walls not an issue. My 2 main L-R are 8 1/2" apart ( center to center of speakers ) . How far back should my seating be? I "think" there is some "basic" math to work from for far field seating. In my "near fields" it is all equal.... as a rule of thumb. Tow in is another adjustment. I am just looking for some "basic" good info and hope I don't start something... You guys have spent a lot of time on these issues..... and I am glad to have your suggestions!
mlbattey
Most common loudspeaker/toe-in orientation I've seen involves speakers toed-in to apex of equalateral triangle & some kind of ratio formula. See: http://www.cardas.com/content.php?area=insights&content_id=26&pagestring=Room+Setup

I've also see other room set-up recommendations. See: http://www.audiophysic.de/info/aufstellung/beispiel_e.html

I use the Real Traps method. See: http://www.realtraps.com/art_room-setup.htm

As you can see, there is no generally accepted formula.

Good luck!
Second paragraph should say; See http://www.audiophysic.de/info/aufstellung/beispiel_e.html

Third paragraph should say; See http://www.realtraps.com/art_room-setup.html

Sorry about confusion.
Thats what I was looking for. The 1.2 times speaker dist. I am also going to try and figure out how to pull the speakers out and not get my wife in a tizzy....LOL! While I know it is try it and listen..... I do like to have a "basic" starting point. Thanks Beavis......

PS.... next house I get will have a "room / for audio" so to speak. I envy you guys who have "the room" for great sound.
Some speakers are designed to be up against or very near the front wall. As such, one should not assume that their speakers will benefit from doing this as it can drastically alter the tonal balance, etc... Then again, i'm assuming that you knew what you were getting when you purchased these speakers and that they are designed to be pulled out in the room somewhat.

An old trick that works very well is to place the speakers using a mono signal rather than a stereo signal. I've discussed the specifics somewhere in the archives, but in which threads, i have no idea. Sean
>