Speaker Isolation -- Experience with Townshend Seismic Isolation Podiums


Over the past several months the new Townshend Seismic Isolation Podiums have been receiving some interesting and positive press. Living as I do in both an earthquake zone (Pacific NW) and in a busy urban setting with a lot of rumble from construction and passing vehicles I thought these could be worth exploring for my setup. As I was not able to find a US distributor I purchase direct from the UK (via Analogue Seduction, highly recommended). I placed an online order, with follow up to confirm the size and weight of my speakers and about six weeks later they turned up on my doorstep (the platforms are made to order with loading on the cells specific to the weight of your speakers)

The Isolation Podiums are basically four load cells attached to a robust platform onto which you stand your speakers. While not cheap ($2500 for the size I needed) they are very well designed and easy to use. For example I was concerned about being able to move my 275lb Magico Q3s up onto the platforms -- actually it was easy as the platform at 20mm is lower than the speaker spikes so it was simply a matter of unscrewing each spike and shuffling the speaker across. Once onto the platforms fine leveling was easily possible by adjusting each load cell. All in all the podium system is very well designed and works exactly as intended.

But how does it sound? With several days listening experience I cannot recommend this product too highly for anyone who wants to hear the best from their speakers. My room is custom designed with a concrete slab floor so a solid surface but of course subject to external vibration. Prior to the podiums I'd been enjoying deep and dynamic bass but had occasionally felt that the sound became congested in more dynamic and complex material. With the podiums all of this clears up. First impression may be of less bass but as is typically the case this was a result of a reduction in boom and smear and instead more of the open sound of real bass (think of a bass drum as being more "whoof" than "thump" after the initial leading edge - too often the sense of large volumes of air being displaced is lost. In addition I became much more aware of all the rhythmic leading edge detail in bass guitar passages, all the little cues the bassist is putting in. Furthermore it became much easier to resolve bass alongside other instruments. Example in point "Bye Bye Blackbird" by Nancy Harms (https://www.youtube.com/watch?v=yd4tQrndlFw). This opens with deep full bass which is a first test but then quickly becomes quite a crowded and in many systems overloaded mix. With the podium in place all of the instruments became much easier to separate and what had been a congested and even edgy mix became clear.

One final and unexpected change is how you can now more easily hear the recording venue. Listening at the start of recordings the sound of the room itself is a very low level mix of rumbles which (when it's present on the recording) is all too easy to lose -- the podiums help uncover this detail and create a much greater sense of real instruments in space. All in all I'd recommend you give these a try and no need to believe in voodoo to buy in to this tweak.
128x128folkfreak
By way of update, I am extremely happy with the Townshend podiums I recently got myself from Nick at Emporium HiFi here on Audiogon.  I got the Townshend Speaker Podiums Size 3 for my Nola Metro Grand 2 speakers.  I replaced the 8 Ultra AL Stillpoints plus Ultra SS bases with the Podiums a couple of weeks ago.  I set them up right away when I got them, although not very well, but even so I was blown away by the improvement I got relative to my previous Stillpoints set up which was itself very good. Then with @mains' (and Nick's) help I corrected the errors in my setup.  Basically my error was that some corners of the podiums needed to be freed up and moved around as the speakers were not bouncing freely although they were moving.  Now everything is fine and its all just great.  The strongest recommendation from me for the Podiums.  And thanks for the help @mains.
For anyone owning speakers that already have outriggers attached to their bottoms, you can get individual Seismic Pods and bolt them onto the outrigger arms, at a considerable savings to the Podiums.
Guys, anyone care to comment on how much better the Townsend Podiums might be, as against three or four pods?  It may be no one has had the chance to do a direct comparison. I use Track Audio Feet at the moment, which are also very good.

 I'd like the Podiums, but they are'nt cheap, a consideration for most of us.
I've not compared the individual pods to the podiums but despite the lower price there are a couple of things I'd bear in mind

Firstly getting a set of pods under your speakers may not be easy especially as they will be pretty unstable until you have all 4 in place. Not a one man job for sure

Secondly depending on the footprint of your speaker it may be less stable on the pods than the podiums. Tall narrow speakers on pods might be worrisome. The podiums act as a wider base
@bdp24 Do the pods already have a screw hole for doing this?  I've had a hard time finding a picture of the top of the pods...  my outriggers don't have a top bolt, the spike just screws into the housing that attaches to the base of the cabinet (Coincident speakers).

thanks,
Chris