2. speakers
  3. 1213505609

Subwoofer damping

I didn't no whether to post this in the speaker or tech forum, but I'll ask my query.

I have a very large subwoofer which has 2 16 inch drivers. I fired this baby up today after having it in storage for many years. I played a reference recording of Frederick Fennell's Pomp & Pipes. Well I set the crossover pots at 10:00, 6 being the lowest and 5 highest. Everthing was ok till there was some low and I mean low frequency with plenty of dynamics. I could hear the drivers make a girgle sound that came out the 4 vents in the cabinet.

I can't recall if I've heard this before and I'm thinking that I need to add additional damping material. Doe's anybody supply speaker wool anymore? I can't imagine overdriving this thing....I think my house would collapse...so adding more material seems might help. Any speaker tech's with answers would be appreciated.

Roger
wavetrader
wavetrader OP
260 posts
 
Interesting.......the NHT X2 should provide the needed flexibility.
shadorne's avatar
Ag insider logo xs@2x
shadorne
7,477 posts
 
Interesting.......the NHT X2 should provide the needed flexibility

I am not familiar with it. However a word of caution - I don't see high pass for removing ultra LF on the specifications. "50 Hz" is the lowest high pass filter which sounds like this is intended to provide a feed to mains.

You might need adjustable high pass at 10 to 40 Hz and adjustable low pass set from 50 to 90 Hz with various filter slope options.

Although I would expect the crossover that originally came with your box would take care of this...could one of the caps have dried out..you know certain caps don't like to be left in storage and will easily blow the first time you fire them up....that might be your only problem... a dud Cap...
wavetrader OP
260 posts
 
a 12 db slope from say 50 should start from 38 db for LF???

Crossover Frequency 50Hz, 80Hz, 110Hz high pass, 50Hz-140Hz adjustable low-pass filter
Crossover Slopes 12dB/octave high pass, 12dB/octave low pass
Phase 0/180 degrees switch, 0-90 degrees variable
Input Connectors XLR, RCA
Output Connectors XLR, RCA
Dimensions 2.125"H x 17"W x 11.5"D
Weight 9 lbs
Controls Gain, LFE Gain, Phase, LP, HP, Boundary (+/-6dB), Stereo/Mono, Trigger mode
wavetrader OP
260 posts
 
I meant...a 12 db slope from say 50 should start from 38hz for LF???
shadorne's avatar
Ag insider logo xs@2x
shadorne
7,477 posts
 
Crossover Frequency 50Hz, 80Hz, 110Hz high pass

With a 12 db slope this will be down 12 db at 25 HZ and down 24 db at 12.5 Hz...

As I mentioned, this filter look like it was designed for the feed to main speakers.

50Hz-140Hz adjustable low-pass filter

This filter appears to be the feed for your subwoofer and it does not appear to have protection or a filter for ultra LF (which is normal because a modern subwoofer usually can handle ultra LF often having momentary gain reduction built in etc.)

If you look at the behringer device then you will see it has a limiter to protect bass woofers...this could be useful.

I am not familiar with NHT x2 - sorry - I just thought you might need pro bass management seeing as what you have was previously in a disco bar,,,
More to discover