Subwoofer with 2 channel stereo setup

Sean that's why I said certain systems.The last time I checked the Aeon I only gets down to around 40 hz. I agree with you ...when I had floorstanders that could do this no sub was needed. Of course the bass was not as tight as it is now with sealed enclosures doing the low frequency duties.

I couldn't help myself ...I went ahead and picked up another matching sealed 12 inch sub for my system today. Can't wait to get it tuned in with the other one.
Now we are cooking with oil ! :-)

I have main speakers that go into the 20 Hz region, but setting the crossover at 80 Hz, thereby freeing the mains of LF duty, makes the system sound even more transparent and open, and seems to expand the sound stage while maintaining precise imaging.

db

For my purposes I selected an REL sub. The reasons for this are the unique high level (music) and low level (LFE) connections and set-up. The REL subs a traditional rca interconnect for the LFE channel. However it also uses a second proprietary connection from the main speaker (L&R) outputs to the sub. There is a separate level control for each connection that provides for fine tune matching of levels for music or movies.

I am very pleased with this arrangement and believe it to be the best solution for integrating a sub into a primarily music system.

Mwheelerk this may work in some systems. But you have to wonder, how much signal degradation is going on running your mains signal through two sets of crossovers.

One pair of crossovers does enough damage. Two pair cannot be good for the integrity of the music. This is why I use the RCA inputs allowing my speakers to run full range with a natural smooth roll off above 50 hz.The sub then picks up around 55 or 60 hz and goes flat to 30 hz. The other way and maybe the best way,is to run a digital crossover before the signal goes to either your mains or the sub bypassing the passive crossovers in both.

I have a sub with my Totem Forests. I bought it before I started using the DK Designs VS1 MkII. Now that I have the VS1, I generally keep the sub off or the level way down. The only time I use it is when I have the volume low with music that I know has a lot of good base or when I want some louder base and want to make the house shake a bit more (this doesn't add to the music quality - just to aesthetic of base). I have a largish room that has a lot of glass and wood which tends to be a bit bright. I had been using a less powerful amp, and previously the base was not very tight, especially a louder levels, hence the powered sub made sense. I do not have this issue now. With my current amp, I would not have purchased a sub! BTW, I'm using an Arcam Cd23, Dk interconnects, and a Totem Thunder sub. It's a musical sub, and I generally like it's quality, but...at this point, I wish I had put the extra $2k+ into speakers.

I think the question that you need to ask yourself is...do you like the music your system puts out in the room that it is in? If yes, then a sub is an expensive addition for (possibly)little gain. If no, a sub might or might not fix your problem.

John