Teres, Galibier and Redpoint


After a lot of research deciding whether I should upgrade the motor on my Avid Volvare or my cartridge I have now decided that upgrading my transport is the way to go. I don't have to worry about motor compatability problems and I can always upgrade my cartridge at a later date. Being that I nearly always prefer pursueing the small company, and that the unsuspended route seems right, the three shops above have really caught my interest.

The Teres 320 or 340, Galibier Gavia and Redpoint Model A all cost about the same. But the same problem arises, I don't have an opportunity to hear and compare them and unless it's on my system, it doesn't really matter. I in no way mean to insult Chris, Thom or Peter, but what seperates these three tables in term of sonics? I say this only because they are contributors to this forum. Anyone have any opinions?

My arm is a Tri-Planar VII. Phonostage a Thor. Art Audio SET amps. Systrum rack. Thanks for your input. Richard
richardmr
Dan_Ed,

We haven't received the new bearing yet, so my table is presently doing a live imitation of an exploded diagram. Fortunately, tables of this type have relatively few parts!

Waiting is hard, I feel your pain. Dutifully cleaning records we can't play doesn't quite satisfy. It does give me a chance to remove the cat hairs from all the fiddly bits on the TriPlanar. Those are hard to reach when it's mounted.

I've also borrowed the Stillpoints that support the 320 to test beneath other components. We normally use cryoed Symposium Rollerblocks with tungsten balls, courtesy of Cello. This gave me a chance to A/B.

Beneath the power amp I prefer the Stillpoints (more texture and inner detail). Paul prefers the Rollerblocks (more presence). Oy! It is rare for us to disagree on sonics for any length of time. So either he'll come to his senses ;-) or we'll conclude that in this application they are different, but only slightly so.
I thought I'd jump in and say thanks to everyone here on the analog forums. I don't post very often, but I do drop by to read the posts when I have a few spare minutes. There is really great information here and a lot of very knowledgeable people who generously share their opinions.

I purchased a VPI scoutmaster last spring so I could get a taste of vinyl. Well - it hooked me. And I've been going nuts since! Anyhow, after carefully considering my options, I took the plunge a few weeks ago and put down a deposit on a Teres table and Schroder arm. I considered many other tables, including the other subjects of this thread - Galibier and Redpoint. In the end, the Teres just appealed to me the most (both technically and visually) and I figured I couldn't go wrong with any of these tables.

Now to sit back and wait patiently... (Argghh!)
:)

Colin
I used a Technics SP-25 as a motor to drive a VPI TNT Jr. platter. The turntable and the motor turns about same speed 33RPM. The pulley on the Technics is about 11.8 inch so the belt tension is much lighter than normal turntable motor which is about 1 inch. The bigger pulley diamter provides much more belt contacting surface area. I wonder why turntable manufacture did not making 4" or 6" pulleys so the pulleys have the same diameters as motor pod. This way, the motor pod still has the same foot print. The pulley can be made from plastic materials for light weight and reduced vibration. The lighter belt tension also reduces side load on the spindle bearing which results lesser side load bearing friction.
The motor pod on my Redpoint/Galbier does not move during normal use. Mine is sitting on a flat surface without footers or spikes. It is fairly heavy so it does not move around unless of course you nudge up against it when cleaning etc.
Colin, We captured another one. Great!

Which model Teres and Schroeder did you fling your hard-earned money at? (Don't worry, there's no wrong answer!)

Nghiep,

The bigger pulley diamter provides much more belt contacting surface area. I wonder why turntable manufacture did not making 4" or 6" pulleys so the pulleys have the same diameters as motor pod.
Excellent point and excellent question. I presume there must be some reason. Anyone?