The new Synergistic Research BLUE fuses ....


New SR BLUE fuse thread ...

I’ve replaced all 5 of the SR BLACK fuses in my system with the new SR BLUE fuses. Cold, out of the box, the BLUE fuses stomped the fully broken-in SR BLACKS in a big way. As good as the SR BLACK fuses were/are, especially in comparison with the SR RED fuses, SR has found another break-through in fuses.

1. Musicality ... The system is totally seamless at this point. Its as if there is no system in the room, only a wall to wall, front to back and floor to ceiling music presentation with true to life tonality from the various instruments.

2. Extension ... I’ve seemed to gain about an octave in low bass response. This has the effect of putting more meat on the bones of the instruments. Highs are very extended, breathing new life into my magic percussion recordings. Vibes, chimes, bells, and triangles positioned in the rear of the orchestra all have improved. I’ve experienced no roll-off of the highs what so ever with the new BLUE fuses. Just a more relaxed natural presentation.

3. Dynamics ... This is a huge improvement over the BLACK fuses. Piano and vibes fans ... this is fantastic.

I have a Japanese audiophile CD of Flamenco music ... the foot stomps on the stage, the hand clapping and the castanets are present like never before. Want to hear natural sounding castanets? Get the BLUE fuses.

4. Mid range ... Ha! Put on your favorite Ben Webster album ... and a pair of adult diapers. Play Chris Connor singing "All About Ronnie," its to die for.

Quick .... someone here HAS to buy this double album. Its a bargain at this price. Audiophile sound, excellent performance by the one and only Chris Connor. Yes, its mono ... but so what? Its so good you won’t miss the stereo effects. If you’re the lucky person who scores this album, please post your results here.

http://www.ebay.com/itm/ULTRASONIC-CLEAN-The-Finest-Of-CHRIS-CONNOR-Bethlehem-Jazz-1975-NM-UNPLAYED-...

Overall impressions:

Where the RED fuses took about 20 hours to sound their best, and the BLACK fuses took upwards of 200 hours of total break-in, the BLUE fuses sounded really good right out of the box ... and that’s without doing anything about proper directional positioning. Not that the BLUE fuses don’t need breaking in, they do. The improvement continues through week three. Its a gradual break-in thing where each listening session is better than the last.

Everything I described above continues to break new ground in my system as the fuses continue breaking in. Quite honestly, I find it difficult to tear myself away from the system in order to get things done. Its truly been transformed into a magical music machine. With the expenditure of $150.00 and a 30 day return policy there’s really nothing to lose. In my system, its like upgrading to a better pre amp, amp, CD player or phono stage. Highly recommended.

Kudos to Ted Denney and the entire staff at SR. Amazing stuff, guys. :-)

Frank

PS: If you try the SR BLUE fuses, please post your results here. Seems the naysayers, the Debbie Downers and Negative Nellie’s have hijacked the original RED fuse thread. A pox on their houses and their Pioneer receivers.

Frank



128x128oregonpapa
I fiddled with my speaker placements and angles following some prudent advice from the 'Gon and I am hearing new sounds from different angles and no goo or additions. So far, "a rickapoodi an' a fandoogly"; (that's great in non Oz speak).
Hint: Everyone is hyper focused on the idea that Graphene is used in some way to improve conductivity of the signal. You guys need to open your minds up to the possibility it has nothing to do with conducting the signal, even though it’s true that Graphene is a super conductor. 😃

Hint 2: Graphene conducts electricity much better than copper. Graphene's current density is 1,000,000 times greater than copper and its intrinsic mobility is 1,000 times more conductive than silicon. Graphene conducts heat better than any other know material in thermal conductivity.

@tommylion

Hmmm. I still have not got a satisfying answer that calms my enquiring mind. I am not convinced. I cannot engineer it. Sorry.

@Tommylion

The fuse is between AC plug and transformer, not thereafter. That's where the power is transformed, lost and mixed. Goo on a cable, or a fuse won't after what is after the fuse.

@geoffkait Graphene is no more a superconductor than the 2 metals I stated before. Plus it has modifying glue to form a liquid to paint, bond and dry, thus diluting the graphene mixture or whatever. Putting superconductive materials on the ends of crap wire will still expose what was there before, as is goes through crap wire (assuming this Graphene mixture is better than pure silver or pure copper, which needs to be from end of fuse to end of speaker driver, otherwise the signal is degraded. Correct me if I am wrong, but you cannot put more water through a pipe even if you increase the pressure and put silver taps on the end. The physics just doesn't add up.

@geoffkait You are treating graphene in the joints, not on the crapo wire between.