2. misc-audio
  3. 131672-481

The new Synergistic Research BLUE fuses ....

New SR BLUE fuse thread ...

I’ve replaced all 5 of the SR BLACK fuses in my system with the new SR BLUE fuses. Cold, out of the box, the BLUE fuses stomped the fully broken-in SR BLACKS in a big way. As good as the SR BLACK fuses were/are, especially in comparison with the SR RED fuses, SR has found another break-through in fuses.

1. Musicality ... The system is totally seamless at this point. Its as if there is no system in the room, only a wall to wall, front to back and floor to ceiling music presentation with true to life tonality from the various instruments.

2. Extension ... I’ve seemed to gain about an octave in low bass response. This has the effect of putting more meat on the bones of the instruments. Highs are very extended, breathing new life into my magic percussion recordings. Vibes, chimes, bells, and triangles positioned in the rear of the orchestra all have improved. I’ve experienced no roll-off of the highs what so ever with the new BLUE fuses. Just a more relaxed natural presentation.

3. Dynamics ... This is a huge improvement over the BLACK fuses. Piano and vibes fans ... this is fantastic.

I have a Japanese audiophile CD of Flamenco music ... the foot stomps on the stage, the hand clapping and the castanets are present like never before. Want to hear natural sounding castanets? Get the BLUE fuses.

4. Mid range ... Ha! Put on your favorite Ben Webster album ... and a pair of adult diapers. Play Chris Connor singing "All About Ronnie," its to die for.

Quick .... someone here HAS to buy this double album. Its a bargain at this price. Audiophile sound, excellent performance by the one and only Chris Connor. Yes, its mono ... but so what? Its so good you won’t miss the stereo effects. If you’re the lucky person who scores this album, please post your results here.

http://www.ebay.com/itm/ULTRASONIC-CLEAN-The-Finest-Of-CHRIS-CONNOR-Bethlehem-Jazz-1975-NM-UNPLAYED-...

Overall impressions:

Where the RED fuses took about 20 hours to sound their best, and the BLACK fuses took upwards of 200 hours of total break-in, the BLUE fuses sounded really good right out of the box ... and that’s without doing anything about proper directional positioning. Not that the BLUE fuses don’t need breaking in, they do. The improvement continues through week three. Its a gradual break-in thing where each listening session is better than the last.

Everything I described above continues to break new ground in my system as the fuses continue breaking in. Quite honestly, I find it difficult to tear myself away from the system in order to get things done. Its truly been transformed into a magical music machine. With the expenditure of $150.00 and a 30 day return policy there’s really nothing to lose. In my system, its like upgrading to a better pre amp, amp, CD player or phono stage. Highly recommended.

Kudos to Ted Denney and the entire staff at SR. Amazing stuff, guys. :-)

Frank

PS: If you try the SR BLUE fuses, please post your results here. Seems the naysayers, the Debbie Downers and Negative Nellie’s have hijacked the original RED fuse thread. A pox on their houses and their Pioneer receivers.

Frank



128x128oregonpapa
geoffkait's avatar
geoffkait
23,365 posts
 
georgehifi
Geoffkait: “paint the middle circumference of the fuse body with a thin layer of product, using care not to paint near the fuse caps...”

What will this "snake oil" do????, it can’t be an RF shield without the Graphene coating being earthed to chassis/mains ground, and to do that would be highly dangerous.

>>>>>Baloney, George. It’s not always necessary to ground the shield. This is one of those times? The Graphene shield is not long enough to act like an antenna. That’s why the SR Fuses don’t have to be grounded either. Capish?


oregonpapa's avatar
oregonpapa OP
4,867 posts
 
^^^ 

Wait a second guys ... We need to trust George's ears. After all, he knows what we hear, and what we don't hear, all the way from Aussie-Land.

Frank
fleschler
2,008 posts
 
Hi Geoff,  back to the graphene.  My friend states that since it is only 1 atom thick, it can't possibly be effective or incorporated into a silver based paste and remain 1 atom thick.  He states that the exterior paste once applied is like graphite, looks and feels like graphite.  He doesn't want anyone to use it on his 99% silver RCA connectors for his ICs.  He doesn't believe in micro-arching on the scale that disrupts the audio signal.  He said it shouldn't be a big problem for higher voltage connectors such as speaker wire and A/C plugs but hates the stuff in general.   I am only relating what this cable manufacturer says.   Otherwise, he's brilliant and designs tremendously musical equipment and cables for affordable prices.  He's a stubborn guy, so for him to admit the obvious difference in fuses and their directionality is significant.
georgehifi's avatar
georgehifi
10,312 posts
 

Looks like it's back to what's real, and not in someones mind eye.

The only reason to change a $2 fuse, just replace it with a new $2 one.

  Mapman inadvertently is agreeing with what really happens to a partially melted fuse, it's called ageing. Good for you.

Funny this should be mentioned as it's just like what happens to a fuse that's seen too many turn on cycles, as there's far more current goes through it at the moment of switch on than any other time, as it has to charge up empty power supply caps ect. that's why fuses and light globes blow (if nothings wrong) at time of turn on, here are some pics of fuse ageing.

A slow-blo fuse "ageing" right to left
https://peakpinball.com/wp-content/uploads/2013/01/fuse-8312-640x426.jpg

A fast-blo fuse "ageing" left to right
https://i.stack.imgur.com/0uqWX.jpg%20 



Cheers George
uberwaltz's avatar
uberwaltz
13,381 posts
 
George.


Zzzzzzzzzzzzzzzzzzz

Oh so sorry I fell asleep while preparing a reply to your "new" post......
More to discover