Thiel 3.6 s and amplifier choices

I once owned 3.6s and loved them. I made a huge mistake in selling them. The main requirement is a fairly powerful high current amplifier that will comfortably handle a 2 to 3 ohm load. Thiel often recommends Classe, though I personally have never heard the conbination. Krell would also be an excellent choice as noted above. Before making a final decision, you should speak directly with the amplifier manufacturer and obtain definite information about the ability of their product to drive such a difficult load.

I had the Thiel 3.6's for 3 years. I chased every possible tweek, from interconnects, speaker cables, to cones, supports, etc. I never could get them to really sing until I replaced my Levinson 27.5 with a Levinson 332. The difference really made me look at all the time I had wasted chasing the holy grail for good sound with upgrades that brought be no closer to what I was looking for. Looking back now, the higher power is an absolute must with the 3.6's if you really want them to sing.

I can only tell you from my own system that the CS3.6's can be tipped up in sound and harsh at times until the final combo came into place.(6 pre-amp / 7 amps later,ranging from Adcom up to Levinson,Rowland and Krell)Also cabling will make a huge difference with them.No matter what the price tag was the final combo ended up being the early 90's Krell gear(used).Since you already have the KRSII my advise would be to listen to the Great old KSA-150 or 250.I'm running a KSP-7b pre and KSA-150 for light listening and drop in the KSA-250 for the fun nights with my fellow musicians.Cabling is all MIT....and I got to tell this is the last "wanting" of anything new for me.Besides,all the money that was budgeted for new gear allowed me to buy mutiple amps and good cabling and even allowed me to have 2 dacs for different types of music....Thiels love power in the form of class-A and the older KSA series before the days of slide biasing where much better for the Thiels...I've tried the newer amps and was let down to a degree because of the huge cost to improvement factors.....e-mail me if you want get a few more ideas.

You've Got To Believe Me on the Krell matching for the cs3.6's.............

http://gonmain.iserver.net/cgi-bin/cl.pl?ampstran&990493650
Check this idea out: $1750.00 for this KSA-150 stereo amp now and add another one a little later when budget permitts,,,,send both to Krell and get back the awesome "MDA-300" monoblocks....300 watts/8ohm--600watts/4ohm--1200watts/2ohm--2400watts/1ohm.
//I'm looking for another KSA-250 to do this with for the MDA-500's!!!!!

I also have Thiel CS3.6 being driven by a Krell FPB-200 and the combo is just amazing. My uncle have the same amp as you the Aragon 4004 being used for his Thiel 2.2s and that just sounds right as the 2.2s does not require much power as the 3.6s. Get a Krell amp with at least 150 watts is all I can say.
Regarding the balanced being tipped up, I use to have the same problem and I solved them by using BDR #3s as footing for the 3.6s.
the rest of my gears are Krell KRC3 and EMC1 Cd player with NBS Monitor series cables and FIM Gold PCs.