Thiel 3.6 s and amplifier choices

http://gonmain.iserver.net/cgi-bin/cl.pl?ampstran&990493650
Check this idea out: $1750.00 for this KSA-150 stereo amp now and add another one a little later when budget permitts,,,,send both to Krell and get back the awesome "MDA-300" monoblocks....300 watts/8ohm--600watts/4ohm--1200watts/2ohm--2400watts/1ohm.
//I'm looking for another KSA-250 to do this with for the MDA-500's!!!!!

I also have Thiel CS3.6 being driven by a Krell FPB-200 and the combo is just amazing. My uncle have the same amp as you the Aragon 4004 being used for his Thiel 2.2s and that just sounds right as the 2.2s does not require much power as the 3.6s. Get a Krell amp with at least 150 watts is all I can say.
Regarding the balanced being tipped up, I use to have the same problem and I solved them by using BDR #3s as footing for the 3.6s.
the rest of my gears are Krell KRC3 and EMC1 Cd player with NBS Monitor series cables and FIM Gold PCs.

Curious about the changing of the guard. Within the past year, there have been at least 4-5 relatively long threads regarding amplification for Thiels. (Worth doing a search and comparing the comments--some of the past threads were fairly detailed and very helpful). Odd thing is, contrary to the ringing recommendation for a Krell / Thiel synergy in this thread, in past threads that combo was the one thing that folks were very consistently warned off of as just plainly a bad mix (with the primary criticism being that the combo was far to analytical and bright). Just goes to show, there aint no arguing with taste. The hands down consensus (brand preferences aside) is that Thiels flourish best with genuinely high current amps. Folks seem to have had the best results with around 200+ wpc from amps that double output into 4ohms (400pwc into a 4 ohm load), which, as I'm sure you know, the 3.6's average. Try to give the Krell & Thiel combo a listen, maybe it's your bag, folks seem to either love it or hate it. Personally, I went with a Bryston. Enjoy. (P.S. despite all of the desperately urgent and genuinely earnest insistence that X + Y = The Best, as long as you let your own ears do the choosing, you really can’t go wrong).

I have Thiel 3.6s at my beach house, and used the Aragon 4004 at one stage (but not for long, it is very solid state sounding if you know what I mean). I now use a Plinius SA250 Mk IV, and the combination is utterly stunning - after going through a long list of amps including Classe and Krell. I don't recommend the SA250 in all applications as it can sound slow with some speakers, but with the Thiel 3.6 - there is true magic going on.

I use a classe ca200 with great results and all mit cabling, 330 shotguns and 750 series 3's. Plenty of power as the classe doubles down into 4 ohms. the mits compliment the thiels ability to image really well. I also have tubes in the pre which I think is critical. With optimum synergy from start to finish these speakers are incredible. If 1 thing is out of whack they will scream it!I wouldn't recommend having 1 aggressive component in the chain including cables and pc's. These speakers are also very fast and decay beautifully, they need a fast amp to really shine.