Thiel cs2.4 upgrade to cs 2.4 se

Not so much high power, more importantly high -current!

desmond-

keep me posted on your cross-over project. Happy Listening!

Dear jafant,
Sure. But it may take same time as currently i m required to travel more often to solicit more new biz in view of global economy slowdown. Not easy in banking industry now.

Dear friends, i tried to kick start my caps upgrading project but unsuccessful. In parcular, i have removed the screws at the bottom of thiel speakers but  can not open the enclosure. May i know anybody can enlighten me on how to dismantle the speakers to gain access to the crossover?

The original CS2.4, as best as I can tell, had 13uF + 1uF and 27uF + 1uF in the tweeter feed. In the SE version, the by-passes are replaced by single 14uF and 28uF caps as seen here:
http://www.hifishock.org/gallery/speakers/thiel/cs2-4se-2-thiel/

I am unable to find these values in single caps from Clarity or Mundorf, altho' you can achieve the same capacitance with, for example, a 12 and 2uF cap. Rob Gillum at Coherent Source Service has SE upgrade kits so that you can transform you CS2.4's performance. Presumably these include the full-value caps seen in the linked pic. He also has the SE outriggers with SS spikes. Please support Coherent Source Service!

I have a pair of SE version, so already with the Clarity SA caps. I might upgrade those to a newer version (eg, Clarity CSA) but will probably upgrade the caps in the woofer feed first. From the schematic supplied by Rob Gillum, it appears there is a 33uF cap in the direct feed. Again, I can't find that exact value in a single cap so will have to get there using a combination.

Rob Gillum wrote me that the CS2.4's bottom panel is glued on. Access to the crossovers is via the passive radiator. I am leery of removing these for fear of difficulty in reattaching them but Rob wrote that you can grasp the radiator by its surround while re-screwing. I will report back as I upgrade my Thiels (won't be anytime soon).