Thiel Owners

Offering a third to Harry's second: All the early spikes are the same. Thiel "invented" spikes in the late 70s for the 03. If others were using spikes at that time, we didn't know about it. Remember, no internet. They were all the same 1/4" x 2" with free 1-1/4" available by request for hard floors. I don't remember when we added the friction O-ring and grip grooves, but then they all became that way. The exception was the 1989 CS5 (? and probably up-market models after 1995?) The CS5 was too top-heavy (and therefore potentially dangerous) for three-point support. We replaced the recessed plinth with a full-footpring base with 4 threaded pins on the corners. That pin is ø 5/16"x18 tpi with 4 wrench flats for adjustment with the included 1/4" wrench. Zero clearance, tight tolerance fit keeps the cabinet from squirming. The holes in the hardwood base are also threaded to supply resistance and obviate the need for a lock-nut. Fun with minimalist elegance both for these threaded pins as well as the normal slip pins where 3 points defines the plane and requires no adjustment.  

The Audiopoint was introduced in 1989. Around that time we made available the smooth barrell pressure fit brass point for select Thiel models. I checked today there are zero available.  Reference in time at my first home in '79 I used hardened steel points sold thru Linn dealers. I used these on Time Aligned  speaker prototypes developed by Ed Long. I remember Harry coming over for a listen.Soon after came the aluminum  TipToes from the Mod Squad.  Tom

coop_301

Welcome! good to see you here today. We do have a few CS6 fans and owners on the Panel. Stay tuned until one of those guys chimes in to address your query.

Mr. Rob Gillum at CSS will be a great resource and can provide additional guidance on your purchase decision. I look forward in reading more about your musical tastes and system plan.

The ML 23.5 is a stone classic power amp. At it age, it could probably benefit from a tune up. A great ML resource is  Pyramid Audio in Austin Tx. 

If on the west coast, George Meyer AV in Los Angeles is another great Audio resource.

Happy Listening!

Hi All,

Since this is my favorite and just all-around best forum I’m a member of, I’m going to ask an ‘off-topic’ question….

I’m in Burbank CA. I want to learn about electricity and amplifier construction and repair. Can someone suggest a professional or organization that would teach me these things?

You can direct message me or reply here if you have any suggestions.

Thanks!

coop_301

I have a used pair of C6’s. Both my midranges buzz occasionally. Sometimes due to under amplification and sometimes just at certain passages rarely in certain songs.

I’m certain I need new drivers. My pair cost $2,500 in 2019.

Still, these buzzings are rare. These are the most natural, honest, powerful and nuanced speakers I’ve had in my system.