No offense guys,but after looking at a picture of this drive system,I think it may be big time flawed.There is not much rubber cushion between the shaft and platter.Also,if the O rings get a little bit harder,and you know they will, vibration problems will start.You will have to keep buying fresh and soft replacements.Stocking them won't help because they will still get hard setting around.Just my 2ยข.Picture link>>[http://www.ttweights.com/idlerdriveBO.html]
TTWeights new Black Onyx Idler drive Turntable
About three weeks ago I drove to Newmarket. It is about an hours drive from Brampton, but I wanted to listen to Larry's 'Christine' turntable. When I got there I found Larry all excited about his newer turntable. A less expensive, more heavily damped version of Christine (and much less expensive). He explained to me how Christine was way overbuilt. There is no reason for a one horsepower motor, way overkill. His 1" carbide main bearing shaft was also way too much, and the shape of Chrisine's plinth did nothing for resonance control. Along comes the Black Onyx, still in R & D, so off I went back to Brampton.
I went back three weeks later, that was a couple of days ago, and with an armful of albums, sat down for a long listen. I will say that a long listen is not necessary. It took about ten seconds to realise this was something very special. Everything from Cat Stevens, Bruce Cockburn and Jeena Lodwick to Dire Straits and YES. Without fail, every single track on every album left me with goosebumps. Singers seamingly playing for me in his office did nothing for my bank account. He now has my deposit, and I wait patiently.
My turntables have all been belt drive. Many years ago I purchased a Heybrook TT2. This was commonly referred to as a baby Linn. My next table was a JA Michell GyroDec (mostly because I thought it looked wicked), and finally to the Teses 340. I will say the jump from the Michell to the Teres was only equaled by the next jump to the Black Onyx. I think I can safely say Idler Drive turntables are a wonderful idea. The Saskia is highly regarded, as is the new VPI. Both idler drive. If you can get to TTWeights for a listen, you'd be doing yourself a favor.
The rest of my system is thus; ZYX Universe cartridge, TriPlanar and Schroeder DPS tonearms, Atma-Sphere MP-1 mklll preamp, Atma-Sphere MA-1 Silver edition amps, EMM Labs CDSAse, Magnum Dynalab MD-108T tuner, and an older pair of ProAc Response 2 speakers. I sold my Coincident TVll'2 and am building speakers using Accuton mid and tweeter, with SEAS 10" woofers. Still months away.
My listening room is almost complete and should be finished about the same time as the Black Onyx. I will get back to you after that.
I went back three weeks later, that was a couple of days ago, and with an armful of albums, sat down for a long listen. I will say that a long listen is not necessary. It took about ten seconds to realise this was something very special. Everything from Cat Stevens, Bruce Cockburn and Jeena Lodwick to Dire Straits and YES. Without fail, every single track on every album left me with goosebumps. Singers seamingly playing for me in his office did nothing for my bank account. He now has my deposit, and I wait patiently.
My turntables have all been belt drive. Many years ago I purchased a Heybrook TT2. This was commonly referred to as a baby Linn. My next table was a JA Michell GyroDec (mostly because I thought it looked wicked), and finally to the Teses 340. I will say the jump from the Michell to the Teres was only equaled by the next jump to the Black Onyx. I think I can safely say Idler Drive turntables are a wonderful idea. The Saskia is highly regarded, as is the new VPI. Both idler drive. If you can get to TTWeights for a listen, you'd be doing yourself a favor.
The rest of my system is thus; ZYX Universe cartridge, TriPlanar and Schroeder DPS tonearms, Atma-Sphere MP-1 mklll preamp, Atma-Sphere MA-1 Silver edition amps, EMM Labs CDSAse, Magnum Dynalab MD-108T tuner, and an older pair of ProAc Response 2 speakers. I sold my Coincident TVll'2 and am building speakers using Accuton mid and tweeter, with SEAS 10" woofers. Still months away.
My listening room is almost complete and should be finished about the same time as the Black Onyx. I will get back to you after that.
- ...
- 39 posts total
- 39 posts total