Get plastic standoffs/spacers, to raise your top cover a bit. Any hardware store should have those, for pennies each, and the longer screws you’ll need. ie: https://www.amazon.com/s?k=round+nylon+spacer&rh=n%3A16413321&ref=nb_sb_noss If vibrations concern you; the top can be rendered about as stable as designed, by using a 1/4 or 3/8" thick by 1/2 to 3/4" wide plastic strip, front and back, with holes drilled, where they're needed.
tubes4hifi SP14 preamp and Psvane CV181 Tii tubes
Hello,
Just a word of caution to those who may be considering the recommendation of many owners to upgrade their tubes4hifi SP14 tubes to the Psvane CV181T Mark II.
The tubes get universal high marks from the reviews I have seen. I opted for the top of the line, buying the Grade A quality from Grant Fidelity at $290 for the matched pair.
Sound is extraordinary. Tubes appear to be of the highest quality.
Unfortunately, the tubes are too tall to fit in the standard chassis. They will not clear the top lid.
My research prior to purchase failed to reveal this as a problem and I am now faced with selling the tubes at a substantial loss, using the preamp without the lid, or drilling holes in it so the tubes will clear the lid. None of those are considered satisfactory solutions.
Has anyone else had this experience, and if so how did you deal with it.
See the attached link for photo. I have placed the chassis lid upside down behind the tubes so you can see the lack of clearance.
https://postimg.cc/XZjL4C50
Just a word of caution to those who may be considering the recommendation of many owners to upgrade their tubes4hifi SP14 tubes to the Psvane CV181T Mark II.
The tubes get universal high marks from the reviews I have seen. I opted for the top of the line, buying the Grade A quality from Grant Fidelity at $290 for the matched pair.
Sound is extraordinary. Tubes appear to be of the highest quality.
Unfortunately, the tubes are too tall to fit in the standard chassis. They will not clear the top lid.
My research prior to purchase failed to reveal this as a problem and I am now faced with selling the tubes at a substantial loss, using the preamp without the lid, or drilling holes in it so the tubes will clear the lid. None of those are considered satisfactory solutions.
Has anyone else had this experience, and if so how did you deal with it.
See the attached link for photo. I have placed the chassis lid upside down behind the tubes so you can see the lack of clearance.
https://postimg.cc/XZjL4C50
- ...
- 6 posts total
- 6 posts total