Does anyone knows how to use that tone arm alignment card correctly? I don't understand what is the correct way to align the axis? Hope to find a step by step guide on this one. Thanks.
That is what I wanted to ask. Should I point the line at the vertical axis of the arm or should I parallel the arm tube with the line when doing adjustment?
Point the arrow toward the pivot point, and then move the arm until you can assess overhand on the grid where the numbers, including 15.8 are. In a sense, you will wind up with the arm not quite parallel.
Luna, I forgot one thing. There is a single small round hole in the area where you mount the cartridge to the tone arm. Use that to set the pivot to spindle distance by having a loose arm board where you can center the hole on the platter spindle. (Cartridge must be off) Then tighten the arm board. That eliminates the need for the Feikert. That is slick.
Then follow Philb7777 for setting the overhang by hitting the 15.8MM line at the point of the arrow.
You must have a verified phone number and physical address in order to post in the Audiogon Forums. Please return to Audiogon.com and complete this step. If you have any questions please contact Support.