Barry, having been part of the world of music for the past 45 years, and having dealt with bowed strings for the past 15, I am relatively aware of the resonating properties of certain woods. That is why I was suggesting bonding 3 or 4 layers of poorly resonating 3/4 inch Baltic Birch plywood, finished by a top made by a 1/2 inch Corion sheet, which -- to the contrary of what you may believe -- does not resonate easily.
On the other hand, reading your initial article, and your response to my query, I am not quite sure why you are here. The article is regretably full of generalities, and your answer is rather condescending. I suggest that, unless you are prepared to foster the body politics with real practical knowledge or suggestions, if your goal were to promote your product and services instead, you may want to consider abstaining from posting to this discussion all together, as paid ads are more appropriate and especially suited for your very type of markcom. Regards, Guido D. Corona
On the other hand, reading your initial article, and your response to my query, I am not quite sure why you are here. The article is regretably full of generalities, and your answer is rather condescending. I suggest that, unless you are prepared to foster the body politics with real practical knowledge or suggestions, if your goal were to promote your product and services instead, you may want to consider abstaining from posting to this discussion all together, as paid ads are more appropriate and especially suited for your very type of markcom. Regards, Guido D. Corona