What capacitor values?

I'm not certain of the response of your midrange, never having seen the data. BUT- Most don't operate smoothly up to 7500Hz. If you look at this response: (http://www.madisound.com/catalog/PDF/scanspeak/12m_4631g00e.pdf) You'll note how erratic the response becomes after 5k. In the case of this mid: I would use it between about 700 and 5kHz where it's response is the smoothest. You may be able to find data for your particular driver, and choose roll-off points accordingly. On the other hand: Most tweeters are designed to function smoothly from somewhat below 5k to above(what's generally considered) audibilty.

The Mid starts to drop at 5K Hz as you say so I think a 5.6uF on the Tweeter would bring it in at 4740Hz.
Any risks in that?

Not at all. Just add the coil I mentioned in the previous post to roll the mid's top-end off, which will eliminate that peakiness from the reproduction and avoid a major overlap in reponses. Don't forget an inductor on the 12" to avoid the same in the woofer/mid region. It may take you a while to adjust to the new-found accuracy of the speakers and don't forget: The caps are going to take a while to sound right too(maybe 200+ hours of play-time).

Thanks Rodman,
You're the only one in 3 forums to actually help me and not disparage my speaker's lack of X-over and suggest I keep the drivers and trash the cabinets.
It's amazing how some people can so clearly ' hear' a speaker from its specifications....and they must think I've never heard speakers with properly designed X-overs?
There's not a single one I've heard, that sounds like live music.
My cabinets sound like the original Martin Logan CLS but with bass.
Those speakers (obviously without X-overs).......continue to be my reference.

I haven't had any electrostatics since my Acoustat Model III's. But- I almost bought a pair of ML Sequels a few years back. A local store was blowing their last pair out for 1/2 price(whatta temptation that was). I've been using modded Maggies for mains for a number of years now. My bi-amped transmission-line woofers just work too well to replace, and most ML's are hybrids. NOW- If I could find a pair with blown woofers for cheap.... OH- BTW: If your mid-range rolls off smoothly around 5k(and is already 3db down at that point), you could get away w/o an inductor on it. I try never to underestimate another's ears, unless they give me an obvious indication that they don't know what they're hearing(or can't hear at all, as the case may be). I hope some of this helps you out, and: Happy re-designing!