Zerostat

One such brush actually has a place for a ground screw. You can attach a very fine copper wire from it to a ground plane. I seldom have the problem but would guess the wire would be more effective than conducting though your body.

I've used a Zerostat for the last 30 years or so. They are easy to use and very effective. If you are thinking of buying a used one, be aware that they do wear out. If there's no "snap, crackle, pop" when you quickly pull the trigger and release it, then the Zerostat is worn out. I've worn out three, and my fourth is getting there.

ALBERTPORTER - Would you be kind enough to give us the name of the brush and info as to where it can be purchased. Thanks.

I used to have a problem like that, then I ran a ground wire. I tied it from the bearing housing under the platter to the phono preamp ground. Now when static builds up from cleaning with a carbon fibre brush, it has a path to ground.

Cheers,
John

I am fanatical about keeping the humidity level,in my dedicated room,at an average of 50%.This has kept any static at bey.I have a built in humidifier in my heating system,however there are some really fine,low cost,units that are digitally controlled,which are small and portable,for floor use.Really easy to maintain,too.I have one of these too,and it is fabulous.Any Home Depot sells a variety of these,usually around 60 bucks,on average.I'm talking about heated moisture units.Best of luck.

PS--I use the Decca record brush,and have not got a trace of static.Funny though,my EMI's don't sound as good as my Decca's!