Zu Omen or Tekton Lore

My Pendragons ship today. I hope to have them early next week.

Shakey

Regarding crossover mods, I'm also curious if people are modding them inside the cabinets, or if you're able to remove them from cabs. I've opened mine up a couple times and don't see how the crossovers are attached internally, assuming some kind of glue, and not wanting to start trying to force anything in there. Is there a trick to it, or do you just have to be really agile inside there with your soldering iron?

You have to remove the lower woofer and the crossover is glued to the center brace. You have to pull it out and then you will have to cut the wires to pull it out. It would be very tight to work on it inside the cabinet.

If you mod the crossover, you will need to rebuild The entire crossover from scratch, oral east I did. The good news is that the parts are very inexpensive so it's not costly.

Is there a trick to dealing with the glue to the brace? Or do you just force it? I wouldn't want to damage the cabinet brace and am concerned about physically forcing the crossover. I guess if you have to rebuild the crossover from scratch, I might as well just not even remove the old one.

I was able to mod the shunt capacitor with a higher value to tame the upper midrange a bit. That's been interesting. If/when I rebuild, I might put in two or three different values with a switch between them for that shunt cap to make it be a bit tunable on the upper frequencies.

I just forced mine out. It came out easily and the bracing was quite strong.