2. speakers
  3. 191618-155017

No bass on B&W 800D2

Hi,

I’ve been a B&W fan Since the late 90s and have owned many different speakers over the years. I’ve owned a pair of 802Ds (first gen) For a long time and those had always been my dream speaker. 

I recently had the opportunity to upgrade to a pair of 800D2. I had never heard the 800 or the second generation diamonds before, but was tempted by the idea of owning the flagships. I don’t like the looks and sound of the newer generation 800 so in my mind, I was upgrading to the top of the line speaker of the last generation that I like.

I’ve had these speakers for three months now, and I’ve played around with positioning and levels of my subwoofers. when I first set them up I immediately noticed a lack of bass compared to the 802’s. I listen in the near field and have the 800 approximately in the same position as the 802, although with slightly more toe in and a little further away from the wall as they seem more sensitive to room placement than the 802s did. Even pushed up to the wall there is not more bass, just boom. 
 

I’m powering them with a Classé sigma amp 2, which doubles to 400W a channel on 4 ohms. Before you say it’s the amp, the 802s sounded exactly the same on my Denon 4520 as they did on the Classé amp after I upgraded to that - so I don’t really subscribe to the “more power” idea and believe an amp won’t change the sound dramatically as long as it’s decent quality and has enough power. I mostly listen at lower levels anyhow. 
 

Has anybody had the same issue with the 800D2 lacking so much bass compared to the 802D? The midrange sounds about the same and the highs are way more tame, which I like, but this lack of low end authority is making me seriously consider selling these again which makes me sad - since they are absolutely gorgeous in the looks department. 
 

thanks for your thoughts in advance - would appreciate hearing from actual owners of these. 

seb_audio
seb_audio OP
12 posts
 

First of all I’d like to say thanks to all of you for chiming in and trying to help, I really appreciate every response.

@audphile1 the same is generally said about the 802Ds I had before, and they sounded the same powered by my Denon 4520 as they did powered by the Classé.

I mostly listen around 75db and I sit in the near field, so I can’t imagine they’re drawing much more than 10W from the amp most of the time. The 802s had way more bass even when playing at very low levels so I really doubt it’s the amp. I’d surely love to test beefy mono amps, but I don’t have space in my room to add separates at the moment.

if I walk up to the room boundaries the 800 have plenty of bass, so it’s likely my MLP is inside a null - what I still don’t understand is how the 802s sounded so different in exactly the same speaker location given how similar their cabinets and overall geometry are. 

audphile1's avatar
audphile1
5,178 posts
 

Can you provide room dimensions, distance from speaker to wall, speaker to speaker and speaker to listening chair?  Use center of tweeter to measure distance. 

Post removed 
zuesman
188 posts
 

get rid of them get the monitor audio platinum 200s or 300s there's so much better than B&W.

oneofew
2 posts
 

seb-audio,

800D2s do not lack bass, I"ve had mine well over a decade, never felt I had the need to add a sub either. I think the disappointment you're experiencing has to do with the volume and distance you enjoy your music. 

I graduated from N803s to 800D2s with a similar experience as you , let me start by saying my N803s play nicely at modest volume levels with my trusty MC352 amp from a 6-7ft listening distance. In contrast 800D2s deliver deep n tonal base, much different than N803, about 5-7 feet further back than my usual  listening distance. They sound flat at modest listening levels, they're at their best in a fairly large rooms at moderate or greater sound levels. 

Your N802 fall somewhere in between my N803s and D2s , try pulling back your listening area and play them louder, they will impress you.

More to discover