gjpgamer
Responses from gjpgamer
| How do I change the tubes in a Luxman LV-105u? Hi Dekay. Thanks for the link. I don't really understand the proceedure though. I need more step-by-step information than is provided there. I'm not technically savvy and some other posters seem to be contradicting the main post. | |
| NEED SYSTEMDEK IV E INSTRUCTION MANUAL Thanks very much. Unfortunately they don't have the IV E manual. I checked before I posted here. Jeff | |
| Systemdek IIX Turntable Bearing Hi Again. Your suggestion worked like a champ. I'm greatful. I sprayed the WD-40 into the bearing well and let it sit for about 60 hrs. I then dumped it out and whacked the bottom of the housing a couple of times with a hammer and the ball came ou... | |
| Systemdek IIX Turntable Bearing Hi Again, Thanks so much for getting back to me. I have some WD-40 here. I'll try that first. If it doesn't work I'll use the "heat treatment", although all I have handy is a gas range. I'll be careful not to heat the bottom too much. I generally ... | |
| Systemdek IIX Turntable Bearing Hi, Thanks very much for your suggestions. I appreciate it. What type of penetrant would be suitable? I'd have to go buy something. Would rubbing alcohol work instead of acetone or lacquer thinner? I hesitate to use the super glue option as I don'... | |
| Teres related question One thing you may want to consider is having your stock RB300 arm rewired with the INCOGNITO kit. You can have it professionally installed for about $150-175. I had mine done at BRIT AUDIO. They advertise on Audigon and Michael is a really nice gu... | |
| Suspended Basis vs Nonsuspended Teres You're missing an essential point in this discussion. In order to fairly compare ANY two turntables you must use the same associated equipment with each. That means ALL components-tonearm, cartridge, phono stage, amp, speakers, stand, cables, etc.... |