hauser
Responses from hauser
| Review: DCM TimeWindow 1 Speaker Arnold, only the TimeWindow Three's and Seven's were mirrored. The original's and the 1A's were both identical, no right or left.Klm, some of the earlier TimeFrames like the TF700 used the same 8" driver as the TW3, but the later TimeFrames like t... | |
| Review: DCM TimeWindow 1 Speaker I just talk to Steve for a better explanation on the TW3’s. As stated before, they are a 2-way design as far as the crossover is concerned. Just a high and low pass filter, but they can act like a 3-way based on the position of the mid level adjus... | |
| Review: DCM TimeWindow 1 Speaker Rolando, are you disagreeing with my statement that the TimeWindow 3’s are a 2-way design? I wasn't sure. You are correct in the description of the speaker in your post, but the speaker is still a 2-way design. I also have a set and there is one r... | |
| Review: DCM TimeWindow 1 Speaker Pcurtin, I might have mention before, in the TimeWindow series, only the 3's and the 7's are designed as rights and lefts. The difference is in the ambient side of the speaker. The 3's are adjustable and the 7's are fixed at 6 dB lower than the di... | |
| Review: DCM TimeWindow 1 Speaker Mmakshak, What problems have you head of? Can you provide a link? I think what Rolando is referring to is that the big advantage the Threes have is that you can compensate for room irregularities with the user controls on the top rear of the speak... | |
| Review: DCM TimeWindow 1 Speaker I've just recently finished a custom center speaker based off the DCM CX17 to match the TimeWindow Sevens. Steve Eberbach worked with me on the design. It uses the same diamond coated tweeter that the Seven uses and the new crossover incorporates ... | |
| Review: DCM TimeWindow 1 Speaker Cwheh, The TimeWindows do very well in a 5.1 set up. The apex of the speaker should point straight forward for the mains. If used for surrounds you need to point them at each other from the side walls behind the listening area. Try to find a DCM C... | |
| Review: DCM TimeWindow 1 Speaker DCM stands for "Dreps Crone Maze"I have a set of TW1a's, TW3's and the "BIG Daddy" TimeWindow Seven's. If your are looking for a center or surround speaker, the CX17 are a perfect voice match for the TimeFrame and the TW3's & TW7's.These speak... |