planerguy
Responses from planerguy
| Review: Philly Audio Blues 7b Ver. II Tube preamp I'd like to buy one, if I could find one. It's as though they never existed! | |
| Audio Research SP-3A-1 part Epilogue(and why almost blind people shouldn't work on their stuff) - I just came back from the local audio shop. After 5 minutes I was leaving with my perfect SP-3A-1. When I reassembled the front face, I apparently pinched off a wire from one of... | |
| Audio Research SP-3A-1 part Ha! OK, replaced the lamp. No instructions came with them, but it became clear the front would need to come off to access the lamp itself. I was then able to unscrew the assembly and removed a most peculiar looking lamp. It had the green lens firm... | |
| Elac 4 pi Plus.2 supertweeters... I'd like to know how you'd replace the ribbon if it was ever needed? | |
| Audio Research SP-3A-1 part Thank you. I sent the email per HiFigeek1's suggestion. On the regulator board upgrade - do any of you have any experiance with the Curcio board? It seems to do the job and eliminate the twist lock caps. They also have suggestions on better riaa e... | |
| Recommendation for Subwoofer for Dahlquist DQ-10s yOU'LL LAUGH! I use a Yamaha YST-160 active sub, in the corner, set at 40Hz. Leave the DQ-10's to roll off by themselves. That little Yamaha, which uses a pair of 8" woofers blends seamlessly with the Dahlquists while providing for a much more pal... | |
| Dahlquist DQ-10 Passive Crossover Hi Clyde -I knew someone who did that exact thing. Jim Austin, who owned "Pro-Sonics" which made what was at the time one of the best sounding electronic crossovers you could buy. He was highly motivated because he wanted to design an electronic c... |