smw1950
Responses from smw1950
| Compensating for different speaker cable lengths Go with OCOS Speaker Cables. They have virtually zero impedance and now that they are owned by DynAudio, information about them is becoming readily available. Mick Tillman is the owner, and told me that unlike other cables, it's safe to have diffe... | |
| Anybody tried Sumiko OCOS cables...? OCOS is the very best speaker cable, at any price, I've ever heard. It's imperative, however, that you get at least a double run, or two cables per speaker (each coaxial cable carries both the positive and negative signals and are terminated with ... | |
| rel with monoblocks I own a REL Studio II along with a pair of brand new Allnic M3000 Mono Block Amplifiers and was able to successfully hook them up to each other without any problems. The way I did it is as follows (and just to be clear, when I say right or left, I... | |
| do i buy a linestage for my Air Tight ate-2 or Buy an Air Tight ATC-2 Line Stage and you will have a matched set (preamplifiers made for one another). I own an Air Tight ATM-2 Tube Powered Amplifier (85 Watts Per Channel), an ATC-2 Line Stage Preamplifier, and an ATE-2 Phono Stage Preamplifier... | |
| Bias current and plate voltage for Air Tight ATM2? I've owned my Air Tight ATM-2 for three years now. For the first two, I could count on one of the KT-88s not only failing, but the resistor catching on fire as well, on an average of once a month!I finally sent the unit off to a gentleman by the n... |