2 channel priority in HT Processor...who's is best


Thank you for input, guidance and help.

I have:

Sunfire TG IV processor

Pass Labs X-1 Preamp

2 channel system is PS Audio Classic 250 amp into ML Prodigy via the Pass preamp

HT is two Sunfire 400 x 5 amps into 3 pair Script I and one pair Clarity.

Sources are primarily Logitech Transport, Oppo 95, Video signal from cable company via HDMI.

I like to utilize the Prodigy in the HT system, and also incorporate the HT system into multi-channel listening sessions (via OPPO 95), music is PRIORITY...movies secondary.

I have no HDMI switching capabilities, but use a 61" Mits DLP tv and for movies and NFL i have a Mits HC 4900 projector to Firehawk.

I would like to get a pre-processor that can replace BOTH the Pass and the Sunfire and allow me to have a single point of control over the whole system. Other components i would like to replace would be the PS Audio DAC III i use off the Logitech Transport. It seems that The Classe (800) seems to allow different configurations to be stored, which would be wonderful, but after spending a good deal of the last 48 hours reading the forums, it seems that the INTEGRA 80.3 may be a good (and $6000) less costly alternate.

Do you know of any pre-processor that can deliver 2 channel as good as the Pass X-1, with HDMI pass or switching (two outputs required).

Classical reference is symphony we go to 8-10 times per year, some jazz, some rock, no rap. Just about anything well recorded.

Thank you so very much!

Loren
128x128lcouplin
Seems like you're gonna pay a lot to equal or better the Pass preamp for 2-channel duties with an HT processor. Maybe I'm missing something, but why not just route the front L/R pre outs from the Sunfire processor to another input on the Pass (or to its HT passthru if it has it) and you're done. It's not a one-box solution, but if you have a universal remote all you need to do is switch inputs on the Pass for HT/surround music (and possibly adjust the volume control if no HT passthru) and you're good to go. Again, maybe I'm missing the point, but seems like you're gonna have to pay a pretty big premium just to get rid of one box that really doesn't take up that much space to begin with. If I'm missing the boat on this please just disregard.
Siox, you're right on the money. But since the DAC in the SSP is as least as much of a compromise as the preamp, Loren is better of getting either a DAC with preamp as I suggested, or even just an outboard DAC and use the Pass preamp as an HT bypass, this would be a 3 boxe setup though.
I suspect the NAD T175HD is quite a bit better and at that price you could go with a M15 and come out money ahead. It seems that the NAD stuff does not get much popular interest but those who have had the opportunity to compare them always choose the NAD for sound quality. The early T175 did have some problems but they seem to be pretty well ironed out now. I bought mine used and once I updated it to the current firmware it has worked fine and I am very happy with the way it sounds and the video performance.
Edorr, KR4, and Soix

I'm thinking of the solution suggested by Edorr and Soix, and from time to time by Kal. If the XLR output of a SACD player were passed through a preamp and input via analog XLR to an Integra would the sound I hear be that of the preamp or the Integra? That is, would the Integra simply act as a cable to get the analog signal to the amp? I assume, but am not sure, that the Integra has such pass through capability via its XLR inputs and outputs.

In my case, I already know I like the stereo sound of my Sony XA5400ES passed through a Proceed PAV to Proceed amps via XLR, but I also want to be able to process multichannel surround and lossless codecs via HDMI. Given that I have a PAV sitting in my closet, replacing my Cary 11a with an Integra 80.2/3 would be a cost effective solution. I might also replace my Oppo 93 with an Oppo 95, so I could continue to use the XA5400ES in the living room. Both the HT and living room systems are controlled by Logitech Harmony Ones.

db
I'm thinking of the solution suggested by Edorr and Soix, and from time to time by Kal. If the XLR output of a SACD player were passed through a preamp and input via analog XLR to an Integra would the sound I hear be that of the preamp or the Integra? That is, would the Integra simply act as a cable to get the analog signal to the amp? I assume, but am not sure, that the Integra has such pass through capability via its XLR inputs and outputs.
No. It must pass through the analog input/output stages and volume control of the Integra. Besides, HTBypass works the other way. You feed the L/R output of the Integra into the analog preamp.