2. analog
  3. 155603-92835

2020 update : JC Verdier La Platine

A recent encounter with a JC Verdier dealer as well as a recent Audiogon discussion thread led to the start of this thread. He was in my house updating my La Platine which had been in storage for ten years with thread and oil. While he has high regards for the deck, his newer clients nevertheless prefer a Techdas iii than an 'old' La Platine. Given the proliferation of expensive decks in the past dozen years, La Platine has become very much under-appreciated. 

It's clear to me that the influence of the La Platine is everywhere to be found. Specifically, the magnetic suspension system that was employed 30+ years ago. Even SOTA offers their newer decks with mag. lev. features. And if you read this review: https://www.callas-audio.nl/Callas%20Platine%20Mod%20Kit%20Review.pdf, the Continuum Caliburn uses the same concept, which was not acknowledged in Fremer's review, albeit with more sophisticated , and expensive, execution.

It is also clear to me that there is much misunderstanding of the workings of the La Platine. I for one have contributed to this. The motor of the La Platine, for example, has been much maligned. The thread drive is another aspect of the turntable that have been described as inferior. With regard to the motor and thread drive, I have been set straight by Chris @ct0517 and Lyubomir @lbelchev. Experimenting with the different types of silk threads, the tightness to the platter  and a renewed understanding of the soundness of the Philips motor have been rewarded with better dynamics and transparency. 

The funny thing is that during the past two years of re-engagement with audio, I have questioned ownership of every components in my arsenal except the La Platine. It has always been a keeper. I wonder if La Platine owners would contribute to celebrating this 'old' deck with tales, advice, and insights?

Cheers!
ledoux1238
ledoux1238 OP
301 posts
 
As I had mentioned, a local audio reviewer did an extensive, photo by photo, presentation of the adjustments through AnalogMagik  for VTF, azimuth..etc, as they appear on the screen of his laptop. The time consuming nature of the process was palpable. And several adjustments, I think especially on azimuth, he could only get close to the optimal settings. However, for all parameters, he concluded that, the software created  better sound quality across the board than his previous efforts, presumably by ear. 

@mtemur As you have confirmed, AnalogMagik is a sophisticated piece of software. And its great to have you share your results. What does your analog setup consists of ?

In the past few months, I have made seriously effort to recalibrate and re-engage the tonearm / cartridge set up process. Due to the sloppiness  of my previous efforts, some of the La Platine speed issues, may very well be setup errors on my part. I am less concerned with the speed related issues or the motor. When properly set up, the micro-dynamics coming out of vinyl is quite something. 
mtemur
11 posts
 
@ledoux1238
What does your analog setup consists of ?
-EMT TSD15N SFL, EMT TMD25N, ZYX 100 ultimate, BENZ ACE SM cartridges,
-La Platine Verdier turntable.
-SME V and SME V-12 tonearms. Kondo SL-115 silver headshell wire, Kondo KSL silver internal wiring, Kondo Ls41 silver tonearm cable
-Kondo SFZ silver SUT,
-Kondo GE-1 phono,
Kondo Overture int. amp,
-all power cables inc. La Platine Verdier’s motor are Kondo KSL silver ACZ,
-interconnects are Kondo silver Ls41.




ledoux1238 OP
301 posts
 
@mtemur Wow! Kondo all the way, very impressive.

I have two additional questions:

1. I like very much your cartridge collection, not the least because compared to the Overture amp and GE-1 phono stage, they are decidedly 'modest'. I wondered what is your thinking on using 'entry' level cartridges? 

2. I had a damaged SME V which was returned to SME for refurbishment. What I got back, as far as I can tell, was a brand new arm! And I have decided to keep it. Any advice on how to optimize the arm with the TT? I see Kondo wiring throughout. 

Thanks!


mtemur
11 posts
 
thank you @ledoux1238
I wondered what is your thinking on using 'entry' level cartridges?
because unlike other equipment cartridges are consumable products (at  least that's what I think). their life is about 500 hours. it will extend to 1000 hours only if you're lucky (doing the right things like cleaning records, gruv glide etc.) retip cost is very high if the cartridge is expensive. I installed 5 Kondo IO-M cartridges for my friends in last 8 years and it sounds terrific if you can afford it.
on the other hand EMT TSD15N SFL may not have top price tag but I won't call it entry level. 

And I have decided to keep it. Any advice on how to optimize the arm with the TT?
I think that's a good idea. I changed my SME V's internal wiring with Kondo 11 years ago and I never regret it. stock van den hul silver internal wiring is terrible. Kondo silver wire definitely transforms SME V. 
if you ever do change it with Kondo please consider owning SL-115 headshell cables and Ls41 armcable too. a friend of mine has a Kondo tonearm and it is actually a modified SME V-12 with Kondo wiring all over.
ledoux1238 OP
301 posts
 
@metmur

on the other hand EMT TSD15N SFL may not have top price tag but I won't call it entry level. 

I surely did not mean to imply disrespect for the classic TSD 15. I applaud your choice of cartridge. Unfortunately, my precent current mode phono stage will not accommodate the 24 ohm inner impedance of the EMT. However, I do run a ZYX Ultimate 100. Would you offer a quick comparison of the two?

On the Cartridge end, I have been persuaded by the opinion that vintage cartridges from the 70's and 80's are comparable in quality to the some of today's more expensive offerings. One of the project right now is to seek out a vintage cartridge, something like an Ortofon MC 2000, to pair with the SME V.


if you ever do change it with Kondo please consider owning SL-115 headshell cables and Ls41 armcable too.

Yes, there will be the eventual direction I'd go. Thanks!

Also, I am quite interested in how you ended with the La Platine ?


More to discover