6sn7 and 5u4 tubes


Will changing the 6sn7 and the 5u4 tubes in my cary 2a3i intergrated make that much of an audible difference when compared to the stock tubes?
charly
My intro to tube rolling began seven years ago when I bought a Blue Circle BC21 preamp.

I was pretty shocked by the transformation when I replaced the stock 6SN7s with WWII era VT-231s.

My favorites for the BC21 are the ones Rodman99999 suggests, the Sylvania and Ken-Rad VT-231s. Both tubes convey an enormous sense of scale while also imparting the positive qualities of this era of tubes. Refinement, dimensionality and a great midrange.

I feel the Sylvania is a bit more neutral, while the Ken-Rad seems more organic. I should say I have a preference for the black glass Ken-Rad over the clear glass version. In my set up, the black glass sounds, bigger, bolder and richer.

Godd luck!
forgot to tell you...don't use Ebay to buy....go to well known respected tube dealers...they will test tubes and have a return policy
BTW I like the KenRad VT231 also but couldn't hear a difference between the clear and black glass.
Larryken,

I've only owned two pairs of the clear glass Ken-Rads, so it could just be a case of bad luck on my part...or a good ol' case of Audiophilia Psychosomatica. Heheh.
I am using an RCA VT231 (black glass) in my Dehavilland Ultraverve preamp and am finding it to be very microphonic. Has anyone else found this tube to be microphonic in this application, or is it possible that the tube itself is bad (the Sylvania Chrome top 6SN7 it replaced was not microphonic in this preamp).
Weebeesdad,

I've experienced this a lot in my Blue Circle pre as well. More so with the WWII era tubes.

I'm not sure if it has to do with the age or condition of the tubes [even if they test well], or if it's just my preamp. It could just be that these "big tone" tubes are more susceptible to microphonics than other tubes.

I've never had this issue with any of the 6922 based components I've owned. DAC or preamp.