$7000 preamp vs $700 receiver - Is the difference THAT significant?


Current setup:
Marantz SR5005 (AV Receiver) + Peachtree Amp 500 + BluSound Node 2i + GoldenEar Trition 2+ = Current Setup

I'd like... no, want... no, desire... to add "Blue Meters" to my setup.  McIntosh haunts me.  For dozens of years.

My quandary:
Acquire a McIntosh C52/53, maybe C2600/2700... vs something like a Marantz AV7705 (or AV7706 appears it was just released).  Yes I know I'm comparing brie cheese and cheddar.  I'm more concerned with the notion that I can get "as good" sound out of that Marantz preamp, as I can from those McIntosh units... (ignore the multi-channel notions for the moment)

Is my sonic happiness "that much better served" by a McIntosh $7K unit vs a Marantz $2-3K unit?  How much difference can I expect?  
rabbottmke
p05129136 posts10-23-2020 10:14pm"any avr unit sounds like crap for 2 channel audio.".
Not all. My Classe SSP-800 has an analog pass through which does not apply its DAC to the 2 channel analog signal. So the signal remains unprocessed straight through to my Jeff Rowland amps.
scottscottsdale16 posts10-23-2020 10:29pm"I have the same question.  I currently stream Tidal from Apple TV into an AVR via HDMI using pre-out into PS Audio S300.  I understand that the DAC in the AVR let’s the side down.  But wouldn’t using the DAC in the Bluesound eliminate that trouble. "
Does your AVR have a good DAC? Better than the Bluesound? If so, does your DAC accept SPDIF connection into a digital input?

I ask because I used to use the same hook up as you. TIDAL through a Chromecast in HDMI port. But now I use my Android w/ UAPP and an OTG cable to a USB to SPDIF converter(Nobsound) and use a Straight Wire 75 ohm digital cable to connect it to my digital SPDIF input. My Classe's DAC supports 24/192 and I can get the first MQA unfolding(don't want/need the second unfolding) because I bought a Bit Perfect add on app through UAPP. A VERY inexpensive way to get TIDAL MQA.
.
@scottscottsdale and @vinylshadow The AVR does NOT have a good DAC, as I understand it.  The Bluesound has a much more evolved DAC, so I'm running unbalanced line out (relying on the Bluesound DAC) with some "TIMBRE" series Kimber interconnects.

I also have an AppleTV4K, and Tidal sounds like garbage thru that source device.  I don't waste my time there.  
You said: ignore the multichannel but you have an AVR in there. What exactly is its function?
The AVR is a poor source and a poor preamp / amp. You don’t even have the top of the line which is somewhat better. You also have a underwhelming source (Bluesound). 
To hit both on the head you should indeed look for a multichannel pre/pro. The 8805 would be a good place to start. But you are stuck with Audyssey. Better still - a NAD M17. You draw two benefits from the NAD: you stay in the Bluesound ecosystem (V2 comes with a pretty decent streamer so you can forget about the separate box) and you get Dirac. You will further benefit from the balanced outputs, if your stereo supports them. 
The NAD will give you a flavour of what good stereo sounds like. You’re not quite there yet but will get you a bit closer. 
And why do you need Tidal MQA? I have a pretty decent DAC. And I prefer Qobuz for sound quality.