@mozartfan
I did not see Tang Band in you list , this is the Best
I did not see Tang Band in you list , this is the Best
A full range speaker?
Many claim to be, but how many can handle a full orchestra’s range?
That range is from 26hz to around 12khz including harmonics, but the speakers that can go that low are few and far between. That is a shame, since the grand piano, one of the center points of many orchestral and symphonic performances, needs that lower range to produce a low A fully, however little that key is used.
I used to think it was 32hz, which would handle a Hammond B-3’s full keyboard, so cover most of the musical instruments range, but since having subs have realized how much I am missing without those going down to 25hz with no db’s down.
What would you set as the lower limit of music reproduction for a speaker to be called full range?
I’m asking you to consider that point where that measurement is -0db’s, which is always different from published spec's.
That range is from 26hz to around 12khz including harmonics, but the speakers that can go that low are few and far between. That is a shame, since the grand piano, one of the center points of many orchestral and symphonic performances, needs that lower range to produce a low A fully, however little that key is used.
I used to think it was 32hz, which would handle a Hammond B-3’s full keyboard, so cover most of the musical instruments range, but since having subs have realized how much I am missing without those going down to 25hz with no db’s down.
What would you set as the lower limit of music reproduction for a speaker to be called full range?
I’m asking you to consider that point where that measurement is -0db’s, which is always different from published spec's.
- ...
- 196 posts total
bache366 posts07-18-2021 8:10pm@mozartfan I did not see Tang Band in you list , this is the Best ~~~~~~~~~~~~~~~~~ You know I came across this driver, and did some reserach,,then for some reason did not like the voicing ona YT video,, But as we just learned, YT vids do not tell the whole story, as my recent experience in The Vox Project has proved. So here is the 8 incher,, from my fav YTer Hifier, This guy is the best on youtube , He knows his stuff and presents it clearly and HONESTLY. I only wish I could be where he is at in testing high fidelity components. Here is his demo of the TB 8.. I am glad you mentioned the TB's, as i was very close to ordering the DavidLouis 6.5. Not sure what the specs are on this TB8, and more important price, As the Vox Project set me back $800+ = I'm running out of cash... Lets take a closer look at the TB DavidLouis offers 3 different designs in the 6.5. Now i have to think things over........ .https://www.youtube.com/watch?v=JeWdxE7qED0&t=115s . |
csmgolf687 posts07-18-2021 4:53pmThankfully, you are not in charge of anything. Go on, keep throwing money at this trying to cobble together something without ANY clue as to what you are actually doing. It is great entertainment watching you fumble around cluelessly. If you had saved all of the money you have blown in the last couple of months flailing about, you could have actually bought something that sounds good, designed by someone that actually knows what they are doing. By all means though, carry on. ~~~~~~~~~~~~~~~~~~~~~ I think you have a mis-understanding about my speakers,,, I like the bass from the W18's,,although as you will hear in the YT vid below,, the bass does in fact, when the W18's are isolated, I seem to hear a certain **flabbiness* to the bass. That may NOT have been there pre adding 4uf in the Thor xover design in the bass. Original Thor 8uf. I havea 10uf and just added a 2.2 uf. I am going to tech today and have him remove the 2.2 Mundorf SESGO ($100m each, came out the Millennium xover), I figured lets xover the W18 even lower, with the 10uf, crossed like 1200hz, now crosses 800hz/ WHat I think is going on, is the W18's are being asked to respond to a much lower fq , and they are getting all flabby. The video was orginally intended to be short , only showing the W18's in action,,But the Sony battery kept going and going,,so i brought in the DL 4 inch and also shows my paper tweet in action. You don't have to stay to the end. As it is over 30 minutes. I'd say my sound is good, At least, the coloration/distortion factors are very very low = no fatigue Only in big orch sections do we hear stress in the DL4. I am talking with ebayer now, not sure to go with his white wood cone 8 inch or yellow wood 6.5 cone Both have Neo magnets. If these larger cones hold up under huge orch fq attacks, , then I can say I have a real 1st class speaker. Sure I spennt on the experiementaions past year. But in the end, it may all be worth it. Just have to doge the wife flack attacks, now and then ;-)),, or really :-(( Can't leave comments as YT has me CANCELED due to my comments in the 1st few days of the cv19 thing. Comments section is PERMANENTLY closed off. https://www.youtube.com/watch?v=XIn2tfYCjK8 |
- 196 posts total