Alon model 1 problems


I recently purchased a pair of Alon model 1's. I'm having a hard time getting them to sound good in my listening room. My room is 14' x 28' with 8.5' ceiling. Currently they are 24" from the back wall, 62" apart. My listening position is 12' from the speakers. They did not come with the spiked feet, so I have them on (9" from the floor) speaker stands. This is currently where they sound the best. But they have a too much midrange and highs verses bass output. I have them bi-wired to a 250 watt solid state amp.

Would a separate amp on the midrange/highs help this situation, say 50 to 100 watts on the mids/highs and 250 watts on the bottom end? I've read reviews of this speaker and the reviewers raved about the bass output and the nice high end, but mine sound very hard in the midrange and highs with the bass being detached with a mid bass suckout. Another problem is volume, when they are brought up to around 87dB the midrange driver starts popping. Shouldn't these play louder without problems?
simpsonjp
your too far away from them and check your tow in you might move them closer to the back wall
You are decreasing the bass output by placing them on 9" stands. Get spikes and get them back down on the floor. This should help somewhat w/the tonal balance.

You didn't mention what amp you're using, but perhaps the speakers are revealing hardness in the mids & highs that is upstream.

Midrange shouldn't be "popping", and they certainly should be able to play 90+db w/o a problem. Your midrange could be blown. Have you tried listening to test tones to see at what freq. the popping occurs?

Call Carl if you can't figure it out. His Nola company is still doing fine. Cheers,
Spencer
Wwshull & Spencer,

Thanks for your responses! To answer your questions, I've moved up to around 9' from the Alon's, they sound better! Right now they are not toed in. I have ordered spikes, just waiting for them to come in.

I'm using two Nakamichi 620 power amps bridged to drive them. These amps sound fantastic on my Digital Phase EP.7bs, a/d/s L780/2 and Focal 806V lodspeakers.

The popping in the midrange drivers sounds like when a speaker is overdriven, I can turn the volume down ever so slightly and it goes away. I had this problem with the Digital Phase until I had them upgraded with new drivers and crossovers.

Thats why I'm wonderng if this speaker works better with two seperate amps, one driving the bass and the other (which could be attenuated) driving the mids and highs?

Thanks,
Jeff
Hi Jeff,
I owned the Alon I MkII's. My room is 13 x 14 with a 14.5' ceiling. The Alons sounded worse on the long wall than the short wall. It didn't make any sense to me. I had them nearly 42" off the back wall and 24" from the side wall. I sat between 7.5' to 8' max away from them. My room has always had problems with bass. I had too much bass with the spikes, etc. I actually placed the Alons on Vandersteen 2Ci (sound anchor) stands and magic. I got the best of both worlds tight and articulated bass. The Vandersteen stands are about 6" from the floor and I had them screwed to the stands as I did the Vandersteens. The Vandersteens were way too bass heavy even on stands. Same with Von Schewiekert VR3's.
I use an Odyssey Stratos Amp and I will tell you it was one of the best sounding combos I have ever owned. I tried tubes and that was a NO NO for the Alons. With the Odyssey Stratos I got a detailed presentation with excellent depth and sound stage along with vocals that were very natural. I do have the med tube traps in my room. I need a set of the larger Tube traps for my room because it's so hard to get clean bass frequencies in it.
As far as the popping noise they never did that at all and I cranked them pretty loud. I will tell you this, they will sound different with each and every change in your system including cables. The Alon I Mk II's were a speaker I wish I had never sold.

I think with a room as large as yours you may need a subwoofer eventually. Especially for classical and sonics featured recordings. You should have excellent dynamics, center fill and a wonderful soundstage regardless. Your Nakamichi amps are stereo amps why not use one per speaker. You really don't need that much power for the Alons. I would try that first. But it is strange that another set of speakers made that popping noise too. That is very odd. If you ask me the amp may be oscillating. Even though the Alon's are 8 ohms the amp should not have a problem with that load at all. I would pull the Alons out about 6' from the rear wall and at least 2 to 3 feet from the side wall and sit about 7 to 8 feet back. Try moving forward and back to see which position is best.
And Carl is a wonderful person and will help you. Alon was till in business several months ago and still in either Upper NJ or NY. You will have to talk to Carl to get new drivers anyway if you ever need them. If you ever need to have your woofers refoamed you should check out Bill at Millersound. He does wonderful work on The Alon Woofers.