Amplifier for Tannoy Turnberry GR

The Wyetech Amplifiers have earned esteemed reputations for sound and
built quality. Two different sound characters I'd imagine, output tubes are
6AS7GA vs 211 tubes. 2K seems a very good value for the Onyx mono
blocks.
Good Luck,

Thanks guys. Yes I am leaning very much towards the Onyx mono blocks. They seem like very capable amps at a decent price.

The Tannoys have been very tube-friendly. We have a lot of customers using them with our amplifiers (which also use 6AS7Gs).

The speaker is rated at 93 db and is 8 ohms. Unless you have a very small room you will want some power to drive this speaker- a good 60 watts in most rooms, perhaps even more.

To really hear what an SET does, its best to have the speaker be efficient enough such that the amp does not need to play more than about 20% of full power to play the loudest portions of the music. Otherwise the higher ordered harmonics come into play and you really don't hear what the amp is about.

This BTW is not about playing loud, its about playing clean.

I too own the recent Limited Edition of Tannoy Turnberry GR and tried it with a Japanese 300b SET. I do not think these
SET amps can exploit the full potential of Tannoy. The minimum recommended power is 20W as per manual. Some of the KT66/88 amps or the new KT150 tubes may be the right choice. Any suggestions.

I am also interested in 845 and let us have more feedback on 845 amps from tannoy users. Some of the parallel design offer more wattage. 2 X 845 per channel can heat up the room considerably.

Mattam:
Do your LE Turnberry's use the pepperpot tweeters and are the speakers any more efficient than the normal Turnberry's?

Would love to hear other Tannoy Turnberry GR or Stirling GR owners chime in here.