asus stxII with sparkos discrete opamps

Thanks!What do you think of analogue devices, is one of their opamps suitable.

I have tried the AD787BRZ op amps (including soldering a 50pf compensation cap across pins 6 & 8 of the op amp - which was challenging).  At first I thought this was one of the most cleanest and transparent op amps without adding any coloration.  However, after extensive listening, I found they sounded just a bit dull and actually a tiny bit dirty.

I have not tried any other AD op amps (such as AD8610).  Those other op amps have a max power supply voltage of +/-13V or lower.  The equipment I test in has a +/-15V power supply, so I can't test these other op amps.

Thanks!
Do you know of any opamp which is sharp sounding. On the asus soundcard there is a lack of treble which may be because of the muse opamps and their slow slew rate as you rightly mentioned.Is it possible to replace the muses with a different opamp which may overcome this lack of treble problem, something which is a more sharper sound

The STX II uses two MUSES 8920 for the DAC I/V stage. These have a slew rate of 25V/us (on the fast side).

However, the output opamp is a MUSES 8820 (outputs to the RCA connectors) has a rather slow slew rate of 5V/us. This will roll off the high frequencies rather drastically.

The OPA827 op amps (that I recommended) have a slew rate of 28V/us, but they are actually very excellent sounding with good bass and great resolution for a monolithic op amp.  They are also more forgiving and easier to implement than other "touchy" op amps, such as the more expensive OPA627 (slew rate 55V/us, but requires 0.1uf MKP capacitor soldered directly across power pins for stability) and stuff like OPA211 (which is a very sharp op amp, but actually came across somewhat bright and harsh).

You could also try the new Burson V6 Vivid op amps.  They are better, sharper and much higher resolution than OPA827, but they -could- have a possibility of coming across slightly thin/harsh in some systems without good power supply.  I would say to try the OPA827 first and if they are still too slow/dull, go for the Burson V6 Vivid.

By the way, I have tried and worked with a great many op amps over the years trying to find the best configuration.  I have ended up running a combination of Burson V6 Vivid fet-based op amps and Sonic Imagery 994Enh bipolar op amps (not recommended for your STX!!!!).

The Burson's are excellent resolution and have a slightly warm character, even though high frequency resolution is amazing.  The Sonic Imagery are the most demanding on the power supply and are just HUGE op amps (requires space).  They also require big capacitors soldered directly onto the op amp for power supply and a very strong main power supply, but they are absolutely amazing sounding!   It's like putting a mini-Krell analog circuit into your DAC/preamp for $94 per dual-channel op amp circuit!  Both Burson and Sonic Imagery are fully discrete Class A analog circuits.