Filtering of the ground can be beneficial if properly implimented, but it also increases the potential for reduced safety. By placing filter circuitry in the path to ground, you limit current capacity. In the event of component failure or an electrical problem ( severe surge or spike ), the filter circuitry could become damaged, opening the safety path to ground. Obviously, this is not good and i don't think that you'll ever see any design using such an approach obtaining UL approval. That's because something like this could literally be a matter of life or death. No manufacturer with any brains wants to risk something like this.
Having said that, providing the shortest, lowest series resistance path to ground that you can is the next best thing that you can do short of creating the above mentioned safety hazard. As i've mentioned in other posts, having someone that knows what they are doing clean and weatherproof your ground connections can sometimes make a world of difference. Most ground connections that i've seen from the AC mains to Earth were severely corroded, offering very poor conductivity. If conductivity to ground is reduced, any noise / RFI that was shunted to ground elsewhere in the house can now find its' way into your audio system. As such, maintaining your ground connection would not only be safer, it could reduce grain and glare while lowering your noise floor.
By the way, wasn't Dejan the guy that was shilling some specific PLC's that he was associated with over at Audio Circle? Sean
>
Having said that, providing the shortest, lowest series resistance path to ground that you can is the next best thing that you can do short of creating the above mentioned safety hazard. As i've mentioned in other posts, having someone that knows what they are doing clean and weatherproof your ground connections can sometimes make a world of difference. Most ground connections that i've seen from the AC mains to Earth were severely corroded, offering very poor conductivity. If conductivity to ground is reduced, any noise / RFI that was shunted to ground elsewhere in the house can now find its' way into your audio system. As such, maintaining your ground connection would not only be safer, it could reduce grain and glare while lowering your noise floor.
By the way, wasn't Dejan the guy that was shilling some specific PLC's that he was associated with over at Audio Circle? Sean
>