BAT vs. Quicksilver

Ever since I put this BAT into the system, I feel it. now is it the tubes or the BAT???

It's probably the heroin.

Specs is what specs does. Yeah, I didn't mean to imply you should look at specs as a guideline for your purchases. But regardless, in considering purchasing a second BAT to punch it up, again, my direct experience in doubling power (buying a second BAT would quite literally be doubling your power), regardless of subtle deviations and the softer clipping of tubes over SS, tube watts vs SS watts, not withstanding, is that I would never subjectively term that increase as "MUCH" more power. For sure it is a difference to be heard/experienced, but I guess I'm just keying in on the "MUCH" in your original query. Thanks for the confirmation/clarification Tubes108.

As far as a serious answer to your "is it the tubes or BAT"; I can't say since I've never heard your system, nor a VK60 for that matter. I'd bet it was a combination of both. Different tube amps can sound as different as any two amps of any topology. If it is tubes in general that you do like, that will not necessarily mean that you will like every tube amp out there. If it is the BAT, likewise it doesn't mean that every BAT amp is going to float your boat the same way. Why not see if there are other Audiophiles in your area who have gear that interests you that you might go and hear? Seems like you have tremendous experience in music and recording and you are the kind of person who knows exactly what they are looking for. Sounds to me like you have it with the BAT and I'd tend to lean in the direction of Justin's original recommendation to get a (used) second VK60 and see if it gives you the power you need. At least then you will have a known quantity. At worst you can sell it again and likely not loose anything in the process.

Marco

My VR4-jr's sound very dynamic with my Quicksilver M80 monoblocks (80 watts per). I am sure with the Quicksilver V4 monoblocks they would be even more so. I think that this would be an excellent combination and highly reccomend checking it out!

Just a side note on the Quicksilver Triodes, for anyone considering the purchase. It was recommended by Mike Sanders (Quicksilver) to use either GE smooth plate or Telefunken ribbed plate tubes for the 12AX7 in these amps. With either of these tubes, I would describe the midrange just as Peter_s does. In fact, I think they sound edgy and somewhat shrill. I went to an NOS Mullard, and that made all the difference in terms of the music having an even balance and warmth to it. The entire frequency range sounds much more pure than it did with either the GE or the Telefunken. YMMV, of course.

Keep the BAT and be patience to eventually buy a second sample of the VK-60.
I have the VK-75SE and it is all i could wish and some more.. yes i'm saving up for another sample to convert to VK-150Se.
I don't agree with Justin quote: "And they run so darn hot in the BATs you may think your house is on fire. But you know that. "

Well i don't know what you mean Justin, as an former Atma-Sphere MA-2 OTL owner the VK-75 is just idling on the warm side.
If you want to experience a real HOT amp try touch the chassis of any Atma-Sphere amps. now that's HOT my friend.

By quotes like "House on fire" things can start buzzing around the internet and within time somebody actually knows (..) someone who had his house burned down.
don't buzz around what started as just a thought in your head.
BAT amps are extremely reliable and yes the 6C33c tube get hot but thats situation normal.
if you happen to consider a VK-31 or VK-51 preamp you need ventilation indeed. for a pre-amp i must say they put out a lot of heat considering others ( and i have had many)
one happy BAT owner ( 75Se 51Se D5Se 10Se 250 )

Oh, True Balanced Rules.