Benefit of shielded ac wire? Any downside?

@ptss:
Run a 10/awg BX- cable solid core conductor from the breaker panel to a metal receptacle box. The metal sheathing on the BX-cable absorbs the (EF)) electric fields emitted by the wires and shunts it to ground. Now from panel to plug is shielded. The upside is low line noise and reduced antenna effect. Downside BX-cable is pricier. Hope that helps. Mike.  

Checking into BX it seems like the sensible option as it also protects from nails, screws and rodents.
I wonder what hi-fi companies that sell high end like Spectral, Pass, Levinson, Goldmund, FM Acoustics, Constellation - advise their clients re home wiring?

Considering that the line/neutral in BX cable is twisted which results in lower inductance versus ROMEX which is separated and parallel, I would like to hear the reasons why BX would result in mushed dynamics?

Lower inductance would make for dirtier transients, but with people pushing low inductance power cords, you need to decide if you are going to have your cake or eat it with that argument.

As cleeds is suggesting, if the wire is not intended for in wall use do not bury it in a wall. No sane electrician will do this. If the inspector catches it he could lose his license. If you do it and your insurance company catches it (after the fire) you lose everything. If you want to run special wire you can wire it to your breaker box and run it externally. It would be a bit messy but you could do it.
ptss, why do I do it this way? Because it feels good is the best answer. 
There are a lot of wires crossing paths at the equipment rack and I want to shield interconnects from AC as best as possible. Aside from keeping power cables apart from interconnects shielding adds another layer of protection. With the phono stage on and volume opened up to explosion levels all I get is a hiss which you can hear one foot away from the speakers. On the hard drive you can't hear anything even with your head in the speaker. I have not checked this out with the supplied power cables. There may not be any difference but, I've already tossed those.
The Marinco plugs are really nice and they look sharp.