The membrane better converts the longer wavelengths to heat energy than does the absorptive material.
- ...
- 11 posts total
Toilets make a great bass trap. They are customizable too - depending where you sit and/or the fluid/solid levels you can tune them for the best sound. The only drawback is fitting the rest of your gear in the toilet - usually the door won’t close - audio is frustrating. Seriously for good bass trap you need at least three if not four GIK corner traps. A large smooth leather sofa will be best. Cloth will absorb too much highs relative to lows. |
Looking at this chart below: https://www.atsacoustics.com/page--Selecting-the-Right-Acoustic-Material--ac.html If you compare the numbers for Owens 703 2" and Owens 703 FRK 2". Both are exactly the same fiberglass, same density, same thickness. The only difference is that FRK has a thin metal foil applied to the front of the panel. When you compare the sound absorption numbers for 125Hz, you’ll see that normal 703 is 0.17, but the 703 FRK is higher at 0.63 (means it absorbs 63% of sound at the 125 Hz frequency). Obviously, this is not a full-blown tuned membrane, but it is giving a similar behavior to a membrane type bass trap. The only theory I have here is that the foil is acting as a type of pressure based membrane. Another example is to look at the GIK Flex-Range Technology: They just put a hard but flexible membrane right in front of the sound absorption layers. The result is more absorption in the lower frequencies (100Hz and under) as well as less absorption of upper frequencies. Please remember that this is still not a "tuned bass trap" like the Scopus traps or a limp mass membrane bass trap. The tuned bass trap would require a specific distance between the membrane and the back of the cabinet. |
- 11 posts total