2. home-theater
  3. 1065635577

Can I integrate 5Ch Surround with my Stereo setup?

Hi Folks:
I currently have what I think is a high-end stereo set up, with CRT (Electrohome 8500HT) and HTPC on the way. My question is, can I somehow integrate a full five or seven channnel surround set up with my existing stereo, leaving my stereo signal path unaffected when I'm just listening to two channel music? My existing stereo system is Supratek Syrah preamp, Blue Circle BC2 monoblocks, Audio Physic Virgo speakers, Teres 245/OL Silver/Shelter 501MK2 vinyl rig.

Ideally, I'd like to be able to introduce a three channel power amp to the system somehow (like a Bryston 3bst), using that for rear and center, and still use my BC2s to drive the front channels, also introducing a preamp/processor to drive the sound for movies, but not have to plug anything out when I switch from movies to listening to stereo (still want to rely on my supratek syrah as preamp for music but can use something else for movies). Am I asking too much? How do you guys integrate stereo with movies, without having to rely on HT preamp/process for music? Thanks for any and all input!!!
128x128outlier
kchahoc
85 posts
 
Does the preamp have some kind of Pass-thru input? I see on the web site that they have an option for that:

http://www.supratek.biz/preamp.htm

Otherwise, just buy two more preamps and a processor and your set. No really, I'm not sure except for the above.
outlier's avatar
outlier OP
381 posts
 
Alas, I don't have the home theatre pass through. Although, I could see myself upgrading to another supratek preamp in a year or so - I could get a HT pass through then.

Also, my power amps only have one input, so I'm assuming that getting another preamp (pre/pro) wouldn't work well, as I'd have to keep switching out the connection to the power amps from both the pre/pro and the Suprate pre.
sogood51
2,157 posts
 
You can still do it, set the volume level on the supratek to 12:00 O'clock. The hook up will work the same as a pass through, you will just have to remember to return the volume on the supratek to the same spot each time you watch a movie because this is the spot you will have set overall volume from the prepro. Hook the Dvd player to the prepro and leave your two channel hooked to the supratek as it is now.

Dave
reubent
6,952 posts
 
It's easy! The simplest way is to buy a quality HT receiver for processing, switching of HT inputs and powering the surrounds, center and sub.

As Dave said, simply run the L&R front pre-outs from your future HT receiver/processor into any unused inputs on your current pre-amp. Then do the same for your new 3 channel amp and the remaining speakers (5.1, 6.1, 7.1). If you use an HT reciever, simply power the surrounds and center off of the corresponding speaker outputs on the HT receiver.

When listening to 2-channel music, the HT add-on is not even in the circuit and can be turned off. For HT, select the corresponding input on the pre-amp, set the volume on the pre-amp to a pre-designated level (like 12 o'clock or top dead center) and turn on the HT receiver. Your HT sources will connect to the receiver, but your existing L&R front speakers will be powered by your existing 2-channel setup.

It's really quite simple and works well. I've used this setup before with no problems. Its a good way to have excellent 2-channel music and decent HT too.

Enjoy,

TIC
islandflyfisher
94 posts
 
Outlier,

I agree with SoGood51. He is 100% correct as I use my
2-channel/HT having the ability to listen to music in 2-channel completely unaffected by 5.1 DD. As stated in his previous post, just make sure that wherever you set the volume control on your Supratek when setting up your 5.1, that you must return it to the exact same position when enjoying a movie. Your front mains output from your HT processor would run through your tape loop on your Supratek. I believe that you are also on the right track using a 3-channel amp for your center and surrounds.
More to discover