Can you help with this problem?


Audiogoners can you help a friend who has the following problem.

Here's my set-up:
NAD 304 amplifier
NAD 514 CD player
Energy bookshelf speakers
Decent high-end cables... don't know the brand because I bought them
used from a stereo shop that was remodelling, but they are supposed to
be better than Monster.

I have a turntable, cassette player and mini-disc as well, but those
are the components involved in the problem.

Every so often, my left speaker will start to "sputter" and sort of
"fuzz out". I used to have the same problem with an entirely different
system (big, honkin' 1970s model Sony amp, Bose 901 speakers). I know
it's not the speaker cause I've swapped them over, and it doesn't seem
to be the connections at either the speaker or amp ends.
The only consistent thing I can tell you about it is that it often does
it with certain bass players... Charlie Haden will often cause it to
happen.
Is this something to do with the amount of power being put out to the
speakers, the frequency of the music or what?

Needless to say, it never happens when you want it to, so it's really
difficult to get anyone else to hear it.

TIA

Ben
ben_campbell
Ben:

The one channel cutting out sounds like a problem that you sometimes get when you are using a vintage amplifier or receiver in your system. The amplifier may just require a good cleaning of its contacts, volume and tone controls, input selector switches (especially tape monotor switches), etc.

I have had this problem when I introduced some vintage Marantz receivers (late 70's) in my system.

I have usually gone to service technicians to do the work. You may wish to do a search of some of the threads in the Vintage section of Audio Asylum.com http://www.audioasylum.com to see what is involved.

Regards, Rich

Ben,

You definitely have a problem that needs addressing. The one issue must address is to isolate the problem. If you have access to another amp or cd player you can start eliminating components and sooner or later you will identify the culprit. You have already switched speakers. That is a good start, now you must switch sources and then amps. Rich gave an excellent suggestion as well. Clean all contacts in the unit with contact cleaner from Radio shack.

hope this helps,

Johnny
Instead of changing your CD player you can connect right channel of the CD to the left in of the amp and left of the CD to the right of the amp and see if the problems changes channels. If it does, than it's a CD player or the music - otherwise it's an amp.
Also, when you switched speakers did you switch speaker cables with them? Perhaps, you should try to switch cables around.
Happy holiday.