Cartridge Setup?

David,
Check Galen Carol Audio (gcaudio.com)website. He has a nice little article on how to set up your turntable and cartridge. You can print it off free and it will be a substantial help. The most useful "instrument" I have come accross to set your cartridge up correctly is the Wallytractor protractor. They are ARM SPECIFIC so make sure you have the right one. He also makes an instrument to set up VTA. Graham makes a great coupling box to set azmuth.
It all takes time and significant "tinkering by ear" to get the end result. Good luck and go for it.
Boato2

The right equipment makes all the difference. I don't know if I would even try it w/o my MoFi Geodisc. They are still obtainable Along with that you need a scale for setting the tracking force. I use a cheap Shure gage from Lyle Cartridges. Laura Deerborn Gives excellent tips in her book "Good Sound." Along with step by step instructions. As has been pointed out already be prepared to spend some time. Don't bother if you are clumsy or can't work in confined spaces. It's not as hard as it sounds. Have fun!!!
Nrchy

Hi Nrchy,
I'm trying to track down a place to get the Mobile Fidelity "Geo Disk" Called Needle Doctor and they didn't know? In this area, Hi Fi shops are few and far between, and few of them know anything about "Fuzzy Woblies" I've tried to setup a Blue Point Special with a 2 point protractor on a Linn Basik arm on a Rega 2, one of the dealers here has said that protractor alignment isn't very accurate? Which becons the call "Where are the GEO Disk?" Had a table a few years ago that had a Grado aligned with the "Geo Disk" less expensive table, but I feel the footprint was acurate. Any and all responses appreciated..

Rwilli6527, I think the Geo-Disc went out of production a year or two back. Try some of the mail-order record oultets. Some suggestions are: ElusiveDisc (www.elusivedisc.com), Acoustic Sounds (www.acousticsounds.com), Music Direct (www.musicdirect.com), Lyle Cartridges and there are some others. As a last resort palce a wanted ad and watch the "for sale" ads. Good Luck. Doug

Get a cheap tracking force guage and the HI FI NEWS test LP. I just set up my new system and it was really simple. Having the Graham arm made it really simple, but with these tools I was able to get an unbelievable sound. I can track on the last track on side one with NO distortion. All I did was set the tracking force to aprox 2 grams. My reccomended range is 1.8 - 2.2. I then adjusted VTA, tracking force and anti-skate using the "tracking" tracks on side one. They also have an azimuth setting track on side two. It took me about 3/4 hour to get perfect sound. The allignment on a Graham arm is great, it's not on the table.