Cartridge upgrade for vintage TT - MM or MC?


I have a Technics SL-D202 that currently has a Sumiko Pearl on it, which is OK but I don't totally love it. The midrange is nice but the treble in particular is lacking. Compared to my digital source it sounds dull and lifeless and therefore I hardly use it.

My question is, would it be at all worth it to upgrade the cartridge or should I just wait until I can upgrade the TT totally?  I am considering the Schiit Sol in the future if they ever get it back on the market but my wife really likes the automatic function of our current table so I may be stuck with it or something similar at least for now.

I had considered trying a lower-end MC cartridge and seeing how that sounds but any other recommendations would be appreciated.

I use a Schiit Mani pre which can be adjusted for any cart (or so I'm told).  

The table came stock with a AT-71E and I also tried a Shure MX97e but neither of those really wow'ed me.
elangley01
Forget MM cartridges! None of them sounds as good as even the venerable Denon 103 (and its variants)!

This is funny, ever heard Denon DL-107 MM that was a broadcast standard before they designed DL-103 MC ? Same brand, just MM, no need to pay for SUT.

If you like conical stylus and low compliance over a decent MM/MI design then you’d better listen to AM radio (Denon was designed for broadcast in the 60s). The OP asking for high resolution, not a rolled-off oldschool sound of Denon DL-103.

The problem with your DL-103 is that you do not even use it on the right heavy tonearm, instead, you’re using it on lightweight tonearm designed for MM (or mid compliance MC).

Another problem with DL-103 is a short life span of the conical stylus (300 hrs) and the cost of re-tipper job, who will glue a new tip on aluminum cantilever. This is a degradation, because the original tip does not have a glue and was pressure fitted. To get equal sound the re-tipper must change the whole cantilever. This is a waste of time and money.

Even a much better LOMC cartridges can’t beat some killer MM or MI.

The MM/MI always cheaper, stylus is user replaceable, life span of the tip can be 600 or even 2000 hrs (depends on the profile).

Also the OP does not have an arm for low compliance MC anyway.

All the typical MM cartridges (Shure/Stanton/AT/Ortofon ...) have coil inductance measured in HUNDREDS of milli-henries! This rolls off the high frequencies and slows transient response. Hardly what can be called "high fidelity"!
The MI cartridges (moving iron - Grado/SoundSmith/B&O) are much better with far lower inductance. And consequently much better high end and faster transients. They are certainly competitive with MCs. I have several Grados. In fact back in 1977 I was one of the first to hear and use Joe Grado's new Signature 2 ($500 - gasp!). At that time the Koetsu was $1000 (double gasp!). And was superior in sound quality!
The PLX1000 has a medium mass arm. It works fine with the low-compliance Denon mc. I have other TTs with high-mass arms (Empires) that are certainly suitable for mc cartridges. Plus also two Fidelity Research arms designed by the late Ikeda-san (FR29 and FR54) expressly for MCs.
I don't believe in re-tipping. When my Denons get too worn I can trade them in for new replacements. And they can certainly go beyond 300 hours by use of Stylast.