Class D


Been thinking of trying a D amp to reduce clutter. Most that I see are not rated at 2 ohms.  My PSB Stratus gold's will drop to 3 ohms or lower at some frequencies. So my question is will these types of amps handle this impedance ?
Thanks in advance. Chris
128x128zappas
@tweak1
Well, not that I’m aware of what you suggest, as his review speaker were SIBELIUS of 87 dB.
Those Mola Mola monos are supposed to ’do’ some 400 odd watt/channel (into 4 ohm...) - somewhat more than my X350.5 Pass.
So - no go with my power saving notions.
This issue is/was some often mentioned with class D amps, and can strip music of its musicality. 
Was happy to go back to my present set up.
Michélle 🇿🇦
My 4 ohm Apogee Duettas were driven very nicely by a pair of Bel Canto Ref 1000 monoblocks. I'm sure they would work fot you Zappas.
What's wrong with getting a competent Purifi-based class D power amp from Apollon, March, Nord, etc., and then sticking a nice tubey tube preamp in front of it?
I hooked my $80 Fosi integrated amp (with Bluetooth) to a pair of kef ls50s and have been frankly flabbergasted how good it sounds.  I have heard some highly regarded “audiophile” amps totally strike out with those.  
Just saying.  Can’t go wrong for the price that is for sure.   Returnable off Amazon and nothing to lose to try for peanuts by high end audio standards. 
zappas
D amp to reduce clutter. Most that I see are not rated at 2 ohms.
As said in my first post, they don’t give it as they either turn off going into protection mode, or they are current starved into 2ohms, or the worst oscillate.
Your speakers present a very hard load especially the combined impedance together with - phase angle (EPDR)
And for @justmetoo here’s a link to "try" and understand how speakers torture amps, especially EPDR. (page2)
https://www.stereophile.com/reference/707heavy/index.html

Cheers George