I still here the same fear obfuscation and doubt thrown at Class D amplifiers, without meaningful research behind it.
One of the biggest: Class D can't be as good as (blah blah) until the switching frequencies are above x Hz.
With zero objective evidence of such a thing. This is a vague, moving goal post. I've heard a number of Class D designs that equaled or better very expensive Class A designs.
I'm not asking you to like any particular class D design, nor am I saying all Class D amps are going to sound as good as any linear amp with particular speaker. I am suggesting this is thin techno-fear without research or experience behind it.
Yes, there is ultrasonic noise. So what? All amplifiers have noise. I have seen and heard zero evidence of this being audible. Yes, there will be amplifiers that will move the switching frequency from 450kHz to higher. So what? At what point, exactly, will it be high enough? What measurements, exactly, and what threshold of those measurements, will satisfy you that they have reached audio nirvana?
You do not have to like Class D. That's fine if you do not, but I've read encyclopedia's worth of hogwash on this particular subject here and elsewhere on the net. It's like a scam diet, which proclaims that x protein is the root of all evil. Buy my new book and I'll show you how to avoid and heal your gut... blah blah blah.
I also want to point out, I've been listening to Class D amplifiers since the 1980s. They were horrible, despite overall reasonably good specifications. So I'm not saying you should listen with specs, but rather, find the specs that correlate to audible effects. 400mV of 500kHz noise is measurable, but not audible, and my amps sound a lot better or as good as several Class A amps with all the speakers I've heard. I would gladly trade the size, cost and efficiency in exchange for a measurement that has zero bearing on my experience.
Sorry. had to vent.
Best,
E