Classic Audio T1 and T3 field coil loudspeakers


Has anyone had the opportunity to listen to the latest versions of the Classic Audio T1 or T3 loudspeakers? The latest versions offer optional field coil woofer, midrange, and tweeter. I know they were on demo at the RMAF, but I was not present. Any opinions would be welcome. Thanks,
lewm
"Does the Hartsfield project a bigger image/soundscape due to its width?"

Do you mean, because corner placement would put the Hartsfields further apart?

Soundstage width is related to setup geometry. The T-3’s would not be in the corners so if they are placed close to the sidewalls theoretically they could subtend a slightly wider angle, but normally I would expect the Hartsfields to cover a wider angle. I never heard a "hole in the middle" with either of them (or the T1), regardless of room size.

I noticed more soundstage depth with the T-1’s and T-3’s than with the Hartsfields.

"Do either the t 3.3 or hartsfield play loud enough for larger rooms, say 36x25?"

Oh yeah. Both of them, but the Hartsfields especially.

The Hartsfields have the most impact of any speaker I have heard. Heard them on two occasions, both of which were truly memorable. Once was at T.H.E Show in Las Vegas (concurrent with CES). My brother and his wife, and I and my wife, stopped by the room. Our wives couldn’t resist the call of the Hartsfields and both got up and just started dancing. I resisted the urge but my butt was shaking in its chair.

Note that the levels of the midrange and tweeter are user-adjustable. So if the top end sounded a bit "hot" to someone under show conditions, smoothness is just a knob-twiddle away.

Duke
@duke,

Thank you for the reply. It is really helpful in supporting my inquiries as I journey into new speaker frontiers. I assume the Hartsfields have to be close to corners for optimal bass, somewhat like the new Klipschorns. I heard the Hartsfield at the Capital Audio Fest along with the T1, what a show that was. Both the T1 and Hartsfield played effortlessly in the room they were setup in with Atmasphere amps driving them. I have been all over the map exploring different speakers to make my next move. Your comments make my salivate to own a pair someday. 

@cal3713
T3s

natch, ralph is THE source on this matter hereabouts and I whole heartedly agree with his comments based on what I’ve heard from the cA speakers and CA maker John Wolff..

I did hear the T3s this year at FLAX 2020 with Atmas MP1 amps as I recall.

to date, both visits to FLAX events showed the CA & PAD & Atmas using purely TT as source. no digital source was evident.

comparing that little session with what the T1s and atmas top tier ‘nova’ power train supplied, in the same room as last year’s visit where the T1s were then kicking it I found the T3s coming this year in noticeably a step below with their insights and organics. some or all of this account could well rest with the tunes being demonstrated at the time, and or due to the fact atmas number one Nova power plant was not in the signal chain, or these T3s were not outfitted with FCs as were the T3s.

however, this is not to say the quick take event was negative in any capacity. moreover, it simply imformed me the T3s reproduction of the signal they receive will remain without audible violation. and true to the upstream components abilities.

although decidedly horns top to bottom they do not yield usual horn characteristics in their presentation.

These 2020 T3s are quite transparent windows thru which to enjoy your music library regardless its contents and I’d say even with digital sources.

that said I’d not go so far as to indicate they would patch or poor recordings and magically transform them into something better.

I saw a line on CA loudspeakers in an article some time ago which accounted for their sound as being dynamic as point source speakers yet as easy and detailed as panels or Stats.

… and i agree honest injun!! these ain’t your Grand pa’s or even your daddy’s horns.

not sure if the T1s qualify as destination fare for anyone, though were I to own them, given what John and ralph have said here on their ease for fitting to rooms, their utter transparency and tonal honesty, their abillity to run off of lower powered amps, the adjustability for each transducer, and choice of any automotive color possible, i’m hard pressed to see why I would be thinking of some other units to replace them with later.

given the CA horns take the glass completely out of the window for the involving and exciting presentation entertaining different amps and amp topologies from time to time would be far more interesting than chasing replacements.
@blindjim,

This really makes for a compelling reason to get any of the series
”although decidedly horns top to bottom they do not yield usual horn characteristics in their presentation. ”

Thats been my concern reading about and listening to other speakers. I recently heard the Klipsch 2 way jubilees and they could play loud, but not sure they are up to the musical qualities that I seek, definitely don’t want shouty, or ear piercing sounds. Your right, the CA are in a class by themselves. 
From https://www.avshowrooms.com/florida-audio-expo-2020-awards-show-report.html

Classic Audio, Purist Audio Design: John Wolff gives us a room walk-around naming the components including the Classic Audio T3 loudspeakers. Also, something new from Purist Audio Design, Jim Aud talks about the Corvus Diamond A/C chord connected to the preamplifier and the Corvus Diamond balanced cable for the reel to reel. We debuted “Killing me Softly” from Anne Bisson’s latest album “Keys to my Heart” on LP. The system delivered a huge soundstage with detailed and delicate vocals along with excellent tone. No shout, whatsoever. Amplification by Atma-Sphere.